It’s worth noting that studs inside a camper are usually spaced irregularly, and sometimes up to 24″ to 36″ apart. They’re not like those found in a residential house, on 16″ centers. There may be sections of plywood added in between the studs to reinforce certain areas in your RV’s walls.

How thick are studs in RV walls?

Most RV walls are around 2-21/2 inches thick.

What are RV walls framed with?

Exterior walls and insulation now go through a bonding process using extreme weight, heat, and glue to bond them together. This process creates an airtight seal that’s lightweight and strong. It’s then laminated to give these materials years of integrity. The aluminum or wood frame fits behind these bonded pieces.

Can you nail into RV walls?

RV walls are designed in a way that makes them pretty thin and hard to know where to hang items. It is usually fairly difficult to know where plumbing and studs are located, making it risky to try and install screws or nails. … It is also best to avoid trying to hang heavy objects onto your RV wall.

Can you drill into camper walls?

Use the smallest screws or nails you can get away with. Long enough to hold the item in place, but hopefully not so long that they will damage anything behind the wall. Pre-drill the holes. By pre-drilling a hole in the wall, you will prevent the screw from cracking the wall as it goes in.

Can you hang stuff on RV walls?

Use Adhesive Hooks and Hangers In an RV, adhesive hangers and hooks are your friends. They can make organizing things easier, but they also work wonders for hanging pictures or wall art. There are all sorts of different hangers and hooks available out there. … The hooks are sturdy and the adhesive strong.

How do you find studs in an RV wall?

1. look for the rivets that attach the interior wall covering to the studs.
2. use a magnetic or electronic stud finder. …
3. go outside in the early morning (when there’s dew on the exterior of your camper) and you should notice an outline of the studs.

Can you screw into outside of camper?

There is no problem drilling a hole in the exterior wall of the rv. make sure your bits are sharp. take it slow but a fast drill speed.

Can you mount a TV on a camper wall?

RV TV mounts are specially designed for RV use, which is recommended if you plan to leave your TV mounted on the wall while traveling. … Yes, but keep in mind, if it has an adjustable arm that doesn’t lock, it’s advised you remove the TV from the mount during travel.

How do you remodel an RV interior?

1. Decorate your RV. Decorations are one of the most basic things you can update in your RV. …
2. Replace furniture. …
3. Add a backsplash. …
4. Add details throughout. …
5. Paint! …
6. Replace the flooring. …
7. 10 Ideas to Spruce Up Your RV That Won’t Break The Bank.

Article first time published on

How do you hang things on a trailer wall?

1. Attach stick-on hooks to the wall for lightweight items such as small pictures. Pull the paper cover off the back of the hook. …
2. Use thin-wall anchors. …
3. Put small pieces of strong wall putty to the back of the item and press it on the wall. …
4. Use interlocking adhesive strips that are designed to hold objects on walls.

How do you hang a curtain rod in an RV?

Start by hemming an inch around each edge of the fabric. Then create a two-inch “pocket” at the top of the curtain by folding down two inches and sewing. This is where you will insert your curtain rod. Once your curtains are complete, you can hang them up and enjoy your new decor.

What kind of studs are in an RV?

Aluminum-sided RVs This is a simple process that can be compared to that of a residential home. You have 2×2 wall studs with interior decorative panelling affixed on one side and fibreglass insulation between that and the exterior aluminium siding, which is installed using an air stapler.

Are RV walls load bearing?

RVs do not have load-bearing walls but a wall may have been put in place to reduce flexing in the RV. … Interior walls may have vital components inside of them that you’ll want to avoid damaging them. This means that even though the wall is not load bearing, it is a structural wall that needs to remain in place.

What are camper exterior walls made of?

Instead of spun fiberglass, closed-cell rigid foam insulation fills the frame, and exterior walls are sheets of fiberglass. Laminated construction uses robotically applied glues to join all the layers of the wall. A vacuum chamber then bonds the layers together into a single solid panel.

How do you secure things in an RV?

1. Use nails or screws for wall items.
2. Try velcro strips or 3M Command strips.
3. Install hooks.
4. Clear off your counters.
5. Check latches on cabinets and drawers.
6. Bungee cords are your friend.
7. Line shelves with non-slip mats.
8. Store items in plastic containers.

Are slide toppers necessary?

RV slide toppers are a way to give your RV slide-outs extra protection from debris and water infiltration. They can provide a number of benefits, including: Preventing leaves, branches, and bird droppings from accumulating on your RV slides. Helping to prevent water, snow, and ice build-up from causing water damage.

Do Command Strips work on RV walls?

Command Hooks use strong double-sided adhesives to attach to the wall. They will keep you from drilling into the thin walls of the RV, possibly hitting electrical, plumbing, or something else vital. … Command Hooks are hailed as the end all, be all to hanging small items on the walls of your RV.

Can you use Command strips in an RV?

Scotch Command Hooks and Strips are an absolute lifesaver for those who need to find extra room in the tiny space of a travel trailer or motorhome. They are easy to mount, can be removed without damaging your rig, and don’t require drilling, meaning you won’t accidentally drill into electrical wiring.

How much weight can a RV TV mount hold?

RV TV Mount, Lockable Full Motion TV Wall Mount Designed Specifically for RV or Mobile Home Use Single Arm Tilting and Swiveling 42 Inches Max, 33 Lb Capacity, VESA 200 Compatible.

Are there special TVs for RVS?

Today’s RV TVs are just as crystal clear and high-tech as any TV you would find in your home. In fact, there are many excellent options to choose from when purchasing a new TV for your RV. … This 19-inch LED TV features a vibrant array of colors and provides up to 1080p HD quality video.

How thick are azdel walls?

Azdel Onboard composite panels are produced in thicknesses (mm) of 2.0, 2.7, 3.6, 4.7 and 5.2. The most common in the RV industry are 2.7, 3.6 and 4.7, and in that order.

Is renovating an RV worth it?

So if you want a personalized and modern look in your RV, you should consider a renovation. And even though the trade-in value on your rig may go down, if you have a high-quality renovation, you may be able to sell it for a good price to a private party.

Can you paint RV walls?

Most RV interior walls are constructed from luan plywood sheets with a wallpaper texture adhered to them, which you don’t want to remove, but can paint over. However, your kitchen or bathroom walls may have an additional wallpaper border added on top of this, which can be removed.

What paint to use on camper walls?

I have had great success with Behr Marquee paint and primer in one on regular walls or over wallpaper. It covers great without the use of an additional primer and almost always covers in one coat! On the other hand, I have also used a bonding primer like Stix or Gripper, and then topped with a less expensive paint.

How do you paint the inside of a camper wall?

1. Sand the walls – you don’t have to go crazy, but scuffing up the walls a bit will help the primer to adhere. …
2. Clean the walls – My recommendation for this would be TSP. …
3. Prime the walls– If you want to use an oil-based primer, my favorite is Zinsser Cover Stain (Kilz is also a great choice).

How do you update an older RV?

1. Upgrade Your Upholstery. Few things make an older RV look shabby than worn, unattractive upholstery. …
2. Remake Your Bedroom. …
3. Replace Vinyl Flooring. …
4. Update Your Lighting. …
5. Paint Your Cabinets.

Can you put a house window in a camper?

The type of windows you choose is completely dependent on your preference and budget. … We do not recommend stained glass windows for those traveling with their Tiny House RV because they tend to be fragile, expensive, single pane and not compatible with tempered glass. Instead, try stained glass overlay or window film.

How much weight can a trailer wall hold?

In most cases, this should be able to hold between 50 to 100 pounds.

How do you make a mobile wall look like a drywall?

1. Remove all trim from the walls.
2. Prime the walls with an oil based primer.
3. Fill in the line gaps in the paneling with drywall mud.
4. Tape and mud the joints between the 4 x 8 sheet of paneling.
5. Spray orange peel texture on the walls.
6. Prime the walls for paint with a latex primer.
7. Paint the walls.