A: You are correct. Vintage Trex decking and other brands of composite decking made of a uniform mixture of wood fibers and plastic can be painted or even stained. … If you have an original-style composite deck and want to paint or stain it, pick a product intended for decks or porches, not walls or trim.

What kind of paint do you use on Trex decking?

Composite decking requires latex paint with a satin or semi-gloss finish. To paint Trex deck, always start with an acrylic latex primer designed specifically for outdoor use. You should get some excellent coverage with Valspar or Rustoleum brands for composite decks.

How do I make my Trex deck look new again?

1. Step 1: Pre-spray your deck. …
2. Step 2: Spray with soapy water & scrub. …
3. Step 3: Rinse thoroughly. …
4. Step 1: Pre-rinse. …
5. Step 2: Mix up your vinegar solution. …
6. Step 3: Sprinkle baking soda. …
7. Step 4: Rinse thoroughly.

How do you paint Trex composite decking?

Most composite or Trex decking can be painted or stained. If you choose to paint, use an acrylic latex exterior primer, and then choose a latex paint with a satin or semi-gloss finish. If you decide to stain, choose an acrylic latex stain with UV inhibitors and mildew inhibitors.

Can composite boards be painted?

Yes, composite decks can be painted, preferably using latex paint for durability and reduced fading. The higher the quality, the better. Painting a composite deck doesn’t affect its longevity, but it does cover any staining or patchy appearance due to sun-bleaching in exposed areas.

How do you get spray paint off Trex decking?

try paint thinner that should remove it. A pressure washer and cleaner could also remove the paint just not use so much pressure to damage the deck. Paul Moshay is right. You can also use a brush to speed up the process.

Does paint stick to composite decking?

The short answer: yes. While composite decks like Trex aren’t designed or required to be paintable or stainable, like their natural wood counterparts, first generation composite decking can and will accept paint under certain circumstances – if properly cleaned, prepped and primed.

How much does it cost to resurface a deck with Trex?

A typical 24′ x 12′ deck (288 square feet) built with Trex decking will cost between $4,244 and $10,826 for materials and installation. Trex decking materials cost $8.25 per square foot on average, while the average labor cost for decking is $7.52 per square foot.

Can you paint the end of Trex?

Composite decking ends can be finished by picture framing, raised fascia board, painting the ends, attaching decking veneer, composite nosing strips, vinyl stair nosing cove, composite corner trim or plastic end caps.

Can you paint UltraDeck?

Can I paint or stain my UltraDeck®? Painting or staining is not recommended, for they do not adhere well to the surface of most UltraDeck® products. However, the woodgrain side of the UltraDeck® NaturalTM boards may be stained with a good quality, composite deck stain after one year of adequate weathering.

Article first time published on

Can you paint or stain old Trex decking?

A: You are correct. Vintage Trex decking and other brands of composite decking made of a uniform mixture of wood fibers and plastic can be painted or even stained. … If you have an original-style composite deck and want to paint or stain it, pick a product intended for decks or porches, not walls or trim.

Can you refresh Trex decking?

Remove larger items of debris by hand or with a broom, then use a water hose to spray down the surface of the decking. Combine half a cup of apple cider or white wine vinegar with a gallon of water and a cup of baking soda — this is the cleaning solution recommended by Trex for its decking boards.

Can you change the color of composite decking?

Although manufacturers demand that the color of trex or composite decking is permanent, they will surely fade in time. Therefore, you can surely paint your composite decking when you want to change the color completely or simply like to freshen the look of the deck.

Can you use Behr DeckOver on composite decking?

For weathered composite surfaces use BEHR PREMIUM ADVANCED DeckOver® to bring new life to old composite decks. See our how-to’s “Prep Your Wood: Weathered Wood” for guidelines on properly preparing your composite surface. A quality pump sprayer may be used when applying wood finishes.

Can TimberTech be painted?

Can TimberTech be painted or stained? We do not recommend painting or staining TimberTech decking. While it is possible to paint our uncapped composite boards, TimberTech cannot guarantee the performance of paint, stain, or other materials, applied to the product.

How do you paint decking boards?

Paint three to four boards at a time from one end of a deck board all the way down to the other end. If applying a stain, only apply as much as the wood can easily absorb. Put some extra paint over any splits or cracks to help fill them in. Leave it to dry and then apply further coats as needed.

What is a composite paint?

Composite materials are mixtures of different fibers bound together by a hardening resin. Depending on the application, composite materials may or may not require painting when they’re new, but painting is a good way to restore or modify color after the original finish has faded.

Can I paint decking?

Painting your wood deck can be a great choice. Paint has quite a few benefits over the other finish options such as stain or sealer, but it may not be for you if you want a natural looking wood deck. … Paint often fills gaps and cracks.

Why is my composite deck turning white?

Probably the first thing a homeowner will notice is white spots on the deck. These are exposed wood particles bleached by the sun and rain. This is a sure sign that the deck’s seal has been damaged.

Is Trex Goo Gone safe?

When clear, rinse off the former blemish, and towel or air-dry the composite material. 2) In an inconspicuous area, test a cleaner such as “Goo Gone®” or mineral spirits and very lightly scrub the area, checking often for discoloration.

Can you use acetone on Trex decking?

What Not to Use. Cleaning solutions containing solvents can damage a Trex deck — notably acetone or toluene-based solvents. … Oil and grease can also affect your deck, so remove these as soon as possible using warm soapy water and a soft-bristle brush if they come in contact with the decking.

How do you hide the ends of Trex decking?

Two widely practiced methods to hide those unfinished composite deck ends are 1) picture framing, and 2) trim boards. Both options offer a beautiful finish, but which method is best for your composite deck?

How do you hide the ends of a composite deck?

The question is, how do you hide the ends of composite decking? There are several ways to go about it. Some of your options include picture framing, installing fascia boards, coating the ends with paint, using end caps and plugs, or edging your ground-level deck with stone.

How long will Trex decking last?

Composite decking requires minimal upkeep and can last between 25 and 30 years.

Is there a cheaper version of Trex?

Generally speaking, Trex and Fiberon offer the least expensive options while TimberTech and AZEK come in on the higher end. However, keep in mind that the higher-tiered grades of Trex are more expensive than the lower-tiered grades of Timbertech so it’s important to make sure you’re comparing apples to apples.

What can I cover my old deck with?

Interlocking deck tiles are a low-cost way to transform your deck into a safer, more attractive space while helping to protect the actual deck from wear and tear. Installing outdoor tile over a wood deck can help to protect you from splinters, while offering the deck protection from sun and wear and tear.

Can you spray paint composite decking?

For composite decking, the best type of paint to use is high-quality latex paint. To have that shiny and sheen look, you may want to get a semi-gloss or satin finish paint. However, it’s best to remember to ask your manufacturer about what kind of paint you can use. They may give you a recommendation.

What are the disadvantages of composite decking?

• A pricey alternative to wood. Durability comes at a cost, as composite decking is more expensive than wood. …
• Composites aren’t natural. …
• Composite decks aren’t completely maintenance free. …
• You’ll need to comparison shop.

How do you clean an old Trex deck?

Spray the deck with a hose to remove surface dirt and debris. Clean the deck with a soft-bristle brush and warm, soapy water. (Trex doesn’t specify a brand of soap, so a dish soap such as Dawn is a good choice.) The brush will ensure you’ll get any dirt in the embossed pattern.

Can you pressure wash Trex?

Trex does not recommend the use of a pressure washer. The use of a pressure washer on deck surface could damage the decking surface and will void the warranty with respect to any condition caused by the pressure washing.

Does Trex decking fade?

It Will Fade, Stain and Scratch Modern composite decking has been engineered to stand up to decades of harsh weather, sun and constant foot traffic. Also, Trex composite decking offers a 25-year warranty that protects against fading and staining and warp.