Plug and Play, or direct wire, LED T5 lamps make switching from fluorescent to LED simple. These bulbs are easy and quick to install. Replacing the ballast in your current fixture won’t be necessary, as it plugs directly into the fixture without any rewiring.

Can I put LED bulbs in my T5?

The first are LED grow lights that perfectly replace a T5 fluorescent light. They come with a fixture and are thus standalone lights. The second are light tubes. They require a fixture to work, but they can use any standard T5 fluorescent fixture you may have.

Can I directly replace fluorescent tubes with LED?

Yes, you can replace fluorescent tubes with LED tubes or LED-integrated fixtures. If you just want to replace the bulbs, you can use plug-and-play, direct-wire, or hybrid LED tubes. Plug-and-play tubes are the easiest to install as they do not require any rewiring to the fixture.

Are LED lights better than T5?

The main advantage of LED over T5 lights is that it is more efficient, which will save cost (bulbs & power) in the long run. … LEDs also do not produce UV light by default (unless UV diodes are used), while florescent lighting does. It takes real depth of knowledge to know what to look out for in an LED fixture.

Do T5 LED lights need a ballast?

T5 lamps need special ballasts to operate. In most cases, the T5 ballasts will not work with T12 or T8 lamps, although at least one manufacturer offers electronic ballasts that can operate either T5 or T8 lamps with appropriate wiring. … Ballasts for T5 lamps are available for 120-, 277-, 240-, and 347-volt operations.

Is T5 light LED?

Philips T5 LED tubes offer an affordable, energy saving retrofit solution. The T5 lamps have been engineered to withstand the test of time with a 50,000-hour lifetime and a limited 5-year warranty to back it up. The lighting performance effectively replaces conventional fluorescent T5 HO or T5 HE lamps.

Can you put a T5 bulb in any fixture?

With retrofit technology you can install T5 lights in older light models and enjoy the benefits of T5 lights even with T8 or T12 grow light fixtures. … The good news are that now there is technology called retrofit kit that lets you transform any T8 or T12 so that it can be fitted with T5 light bulbs.

Do T5 bulbs use a lot of electricity?

Energy. A four-lamp bay using high output T5 lamps uses 220 watts of power including the power used for the ballast; a six-lamp T5 bay uses approximately 342 watts of electricity. Four-lamp T5 bays use about 6,840 kilowatts (kW) of electricity per hour, with six lamp bays consuming about 10,260 kW per hour.

Are T5 LED Full Spectrum?

Barrina T5 Grow Lights, Full Spectrum, 4ft 160W (8 x 20W, 1000W Equivalent), LED Grow Light Bulbs, Plant Lights for Indoor Plants, Greenhouse, Plug and Play, 8-Pack.

Are T5 lights being phased out?

Notes to editors The new regulations would phase out most remaining halogen lamps from September 2021 and the traditional fluorescent tube lighting, which are common in offices, from September 2023 onwards. HL R7 halogens will remain available on the market, and some fluorescents such as T5s.

Article first time published on

Are T5 lights good for growing coral?

The T5s will do the rest. This includes growing corals without fussing over unnecessary bells and whistles. And with T5 lighting, there are no hot spots to worry about. You simply place your coral at the correct tank depth and let them grow.

How much does it cost to run a T5 light?

So running two 4 foot panels with 4 lamps each and 12 hours per day, cost me around 62 cents per day. This adds up to around $19 per month. That’s roughly $226 yearly. I only use my lights from October to the end of March.

Do I need to remove the ballast to use an LED bulb?

A plug and play LED is a fixture where you can install LED bulbs to what was once a fluorescent bulb. This is an easy solution and requires minimal effort on your part. Since it works with the existing ballast, there is no need for rewiring or ballast removal.

Will LED bulbs work if ballast is bad?

Can LED lamps work off of existing ballasts? Yes, if they have an internal driver than can work off that ballast. Philips, for example, has designed a tube that is compatible with an existing electronic ballast.

Can I bypass the ballast for LED lights?

Since LED lights work on low DC voltage, they need a driver. Most T8 LED tubes do not need a ballast. So, if you are going to install a T8 LED tube light, it will require a ballast bypass unless you choose a ballast compatible T8 LED tube.

Can I put a T5 bulb in a T12 fixture?

T5 lamps cannot replace T12 or T8 lamps because of differences in physical and electrical characteristics. … Miniature bi-pin sockets fit T5 lamps, while T8 lamps need medium bi-pin sockets.

Can I replace a T12 bulb with a T5?

T5 bulbs use about 45% less energy than T12s. For some applications, one T5 bulb can replace two T12 bulbs, providing even greater energy savings (a process called “de-lamping.”) The typical T12 four-lamp fixture uses 172 watts of power between the lamps and ballast.

Are T8 and T5 bulbs interchangeable?

The major physical difference between T5 and T8 light bulbs is the length and diameter of the tube itself. The T5 tends to be slightly shorter than the T8 tube, and is significantly smaller in diameter. This factor is important to consider when looking at your fixture, because the two tubes are not interchangeable.

Is T5 LED or fluorescent?

Made to effectively replace linear fluorescent tubes, T5 LED tubes are an energy efficient alternative for linear fixtures, strip lights, shop lights, and troffers.

What is the brightest T5 bulb?

Currently, the brightest T5 sized LED tube light is the Philips 473512 LED Dimmable Light Tube. This tube shines with 3500 lumens (54 watt replacement). They cost around $85 for a pack of ten.

Are T5 LED lights dimmable?

With an exterior power supply, this T5 tube light can be dimmable and compatible with most traditional dimmers. Compared to conventional fluorescent light, the new LED T5 tubes can save over 70% energy with a longer lasting lifetime up to 50,000 hours.

Is T5 a good grow light?

Are T5 Lights Good For Growing? Of the fluorescent lighting options, T5s are my favorite for growing seedlings and small plants. They produce significant light that’s good for vegetative growth, and they don’t generate much heat. They’re also a more affordable option than most LED alternatives.

Will 6500K LED grow plants?

Both 5000K and 6500K white light is great for growing plants, but not as great for flowering them. It will still work fine, but a warmer color temperature would work much better.

Are T5 bulbs full spectrum?

On the contrary: there are actually T5 grow light bulbs that give you high amounts of UV. … These are known as either “UV bulbs” or “Full Spectrum+UV bulbs” and they’ll definitely help give you quality harvests.

Are LED tubes better than fluorescent?

LED tube lighting is the better choice because it lasts about 40,000 hours longer in testing, is more energy efficient, will save you more money, and will leave less impact on the environment.

How far away from plants should T5 be?

Although T5 lights are famous for emitting very little heat, this doesn’t mean you can put the bulbs an inch above plant canopies, as this distance will still damage the plants. The best height for a T5 grow light is about 6-8 in. above the plants, but you should increase that gap to 12 in.

How many watts is a T5 LED bulb?

T5 lamps are available for standard output and high output. The wattages for standard T5 lamps are 14, 21, 28, and 35 watts. The high-output T5 (T5 HO) lamps are available in 24, 39, 54, and 80 watts (49-watt T5 HO lamps are also available from GE Lighting).

Why are halogen bulbs being banned?

Why are halogen bulbs being banned? The ban on halogen light bulbs comes as part of a series of measures to address climate change. It is expected that the switch to LED bulbs will cut 1.26 million tonnes of CO2, which is the equivalent of removing more than half a million cars.

Are fluorescent lights going to be banned?

The sale of halogen lightbulbs will be banned in the UK from September as part of ministerial efforts to cut carbon emissions. A ban on fluorescent lighting, which is mostly used in offices, will follow in September 2023.

Can you put LED bulbs in a halogen light fitting?

Yes, in many cases, you can simply replace your bulbs separately, one by one. Furthermore, LEDs can handle all hues of white light, so the warm yellowish light of halogen bulbs is perfectly within reach! …

How many T5 do I need for a reef tank?

I think a good general rule of thumb is to plan on one T5 bulb for every 3″ width of tank. So if your tank is 24″ wide, I would plan on using 8 bulbs. For people that want to do an LED / T5 hybrid, I think one bulb for every 6″ width of tank is suitable.