Initial drench/application – 2 oz. per gallon. Secondary applications – 1 oz. per gallon.

How much green cleaner do I use?

Initial drench/application – 2 oz. per gallon. Secondary applications – 1 oz. per gallon.

How often can I use green cleaner?

How often should I apply Green Cleaner? Every 1-2 days for treatment. Once per week for maintenance and prevention.

Can you spray green cleaner on soil?

Green Cleaner kills soft body insects, their larvae & eggs, powdery mildew, mold, and fungus on contact without using harmful chemicals. Green Cleaner spray will adhere to the target insect, larvae, and egg case. … Green Cleaner is natural and is safe for use around people, pets, soil, and food.

Is Green cleaner safe for plants?

Green Cleaner Spider mite and Mildew Control is a safe, all-natural concentrate that packs a potent punch against mites and mildew. It can be used as a solution to dip tender new cuttings in, to prevent garden contamination when outsourcing plant starts, and can be used from start through harvest as a treatment.

How do you use root cleaner?

1. Root Drench – 1 oz. per gallon of water applied every 3-4 days.
2. Weekly Maintenance – 0.5 oz. per gallon of water applied every 7 days.
3. Flush – 1 oz. per gallon of water.

Does green cleaner work on fungus gnats?

Spray Green Cleaner on plants of every age, from clones through harvest. … It will work as a root drench and take out fungus gnats and their larva, but you want to limit it to two applications as Green Cleaner can build up in the soil.

How long do russet mite eggs live?

Like most eriophyid mites, they have two legs on each side of the body (a total of four legs instead of eight like most mite species). The life cycle (egg to adult) takes 30 days at 80°F (27°C) and 70% relative humidity. Adults can live for approximately three weeks.

How do you make a Lost Coast plant therapy?

1. SHAKE concentrate WELL before measuring.
2. Add purified water to your application sprayer.
3. Clear the lines of your sprayer.
4. Add 2 tbs. (1oz) of concentrate per 1 gallon of water.
5. Shake/agitate mixed contents of sprayer before applying to plants.
6. Agitate as needed during use, approximately every 5 minutes.

Does Lost Coast plant therapy work?

Lost Coast Plant Therapy suffocates and dehydrates soft body insects, their larvae and eggs, powdery mildew, mold and fungus on contact. … If the product does not contact the insect it can’t suffocate or dehydrate it. Many insects and diseases are eliminated on contact with one application.

Article first time published on

How do you get rid of russet mites?

Micronized sulfur is one of the most effective ways to treat russet mite infestations. Once micronized sulfur is diluted in water, it is mostly commonly applied using a sprayer. Three applications in one week are recommended. Inspect plants and repeat as needed.

How do you treat broad mites?

Translaminar systemic miticides are the preferred methods of broad mite control. The miticides, which have translaminar activity, penetrate the leaf and move within the tissue from top to bottom. Foliar spray options include Avid, Kontos, Pylon, Savate and Sirocco.

Can you use green cleaner on clones?

Spray green cleaner on plants of every Age, from clones through harvest. Unlike other products, spider mites do not get immune to green cleaner. … All natural, you can even use green cleaner on the day of harvest.

What is organic cleaner?

The definition of organic dry cleaning Basically, green dry cleaning means that your dry cleaner is using an organic solvent, such as a non-toxic hydrocarbon solvent, rather than the dangerous and damaging perchloroethylene.

What are the ingredients in Simple Green?

• Water | 7732-18-5.
• C9-11 Alcohols Ethoxylated | 68439-46-3.
• Sodium Citrate | 6132-04-3.
• Sodium Carbonate | 497-19-8.
• Tetrasodium Glutamate Diacetate| 51981-21-6.
• Citric Acid | 77-92-9.
• Methylchlorosiothiazolinone | 26172-55-4.

Is Root cleaner organic?

Root Cleaner by Central Coast Garden Products is a natural pesticide used to eliminate soil borne pests and disease pathogens.

Does root cleaner work?

Tree root killer is pretty much exactly what it sounds like: it’s a chemical that kills tree roots. Different types of root killer work in different ways. … Although it’s effective for killing tree roots, copper sulfate is reputed to be bad for pipes, and can also kill helpful bacteria in your septic tank.

What dissolves roots in pipes?

Copper sulfate is a natural herbicide and will kill off the small tree roots invading your sewer pipes. Flushing half a cup of the crystals down the toilet should do the trick.

What are root aphids?

Root aphids — aphids that stay at or above the soil line — are from the family Phylloxera, a near-cousin of aphids. … They’re hard to spot and unlike small colonies of green and other aphids found on stems and leaves, root aphids are more likely to get out of control.

Can you spray Lost Coast plant therapy on buds?

Yes it will. I don’t recommend spraying at all in flower.

Can you spray Lost Coast plant therapy in flower?

Yes it can! Just add 1oz of our concentrate to 1 gallon of water, same ratio as for spraying. For very stubborn infestations in the soil, you can also increase to 2oz of concentrate per gallon, and add an additional 1 oz of isopropyl alcohol.

Does Lost Coast plant therapy work on caterpillars?

Our laboratory tested samples of Lost Cost Plant Therapy and said that it is a phenomenally clean product with great ingredients. … Well its Lost Coast Plant Therapy. It started with a free sample that saved my outdoor from caterpillars and mites to absolutely demolishing mites and Powdery Mildew indoors.

Where do russet mites lay eggs?

The russet mite has a high reproductive potential (up to 53 eggs per female) and can complete a life cycle (egg to adult) in a week at warm temperatures. Females live for about 22 days laying eggs on the undersides of leaves, leaf petioles, and stems. Young nymphs tend to feed close to where they hatch.

How do I know if I have russet mites?

1. Identification. Tomato russet mites are very small — only about 1/5 mm long, so you need at least a 14X lens to see them. …
2. Damage. Leaves and stems damaged by mites develop a greasy appearance, then dry out and turn bronze. …
3. Solutions.

Can russet mites overwinter?

They differ from many other mite species in that they only have two pairs of legs. Females overwinter inside the stems of affected plants as well as at plant joints. Damage: Russet mite damage usually presents itself at the bottom of the plant and moves upwards as the mite population does.

Does plant therapy work on spider mites?

Lost Coast Plant Therapy 32 oz – Kills Spider Mites and Powdery Mildew.

What is plant therapy used for?

Horticultural therapy is a technique that relies on plants and gardening to help people overcome health issues such as high blood pressure and memory disorders. It can also greatly help those battling depression, anxiety, addiction, and for survivors of abuse.

What is powdery mildew?

Powdery mildew is a common fungus that affects a wide variety of plants. It is easily identified and appears as light grey or white powdery spots usually found on infected leaves, but can also be found underneath, or on stems, flowers, fruit or vegetables.

Do you have to rinse off Simple Green?

▶ Vegetation — Is Simple Green All-Purpose Cleaner safe for vegetation? Diluted Simple Green All-Purpose Cleaner will not harm grass or flowers, but it’s always a good idea to rinse foliage after it has had contact with the product.

Can you use Simple Green to clean a bathroom?

Whether it’s a soap scum ring around the tub from bath time or stubborn stains from everyday dirt and oils, Simple Green All-Purpose Cleaner can dissolve soap scum and clean bathtub stains. To prevent soap scum buildup and stains, it’s best to clean out your bathtub every week.

Can I use Simple Green to clean a deck?

Simple Green Deck and Fence Cleaner is ideal for both manual and pressure washing your entire deck, lifting dirt, grease and sap from wood and composite surfaces. If using a pressure washer, avoid using a maximum pressure setting, as too much force can damage the wood fibers.