Easy to work but not known for its durability, Tasmanian oak timbers are on average low on the Janka hardness scale at just 5.5 and relatively light with densities ranging from 650 to 1050 kg/m³ on average, but this will, of course, vary greatly depending on the ratio of the three different types of wood used to create …

Is Tasmanian oak a soft or hardwood?

Warm, dense and resilient, Tasmanian Oak is the preferred hardwood for a wide range of applications.

What are the disadvantages of using Tasmanian oak?

• high tannin content and exposure to wet and cold weather can react with oil finishes.
• very heavy wood.
• thin oak veneers can be difficult to protect as finishes can react with adhesive used in the veneering process.

Is Tasmanian oak a strong wood?

A strong and stable timber, Tasmanian oak offers good all round workability. It planes, sands, finishes and glues well, and will readily steam and bend. This makes Tasmanian oak is ideal for internal applications and furniture.

Is Tasmanian Oak good for chopping boards?

Our skilled artisans use these woods to handcraft superb chopping boards that harness the natural beauty of the woods – no two boards are the identical. This board is a large 50 x 34 x 3cm thick and would be ideal for daily chopping or presenting on.

Is Victorian ash the same as Tasmanian oak?

Victorian Ash refers to the hardwood produced by two species – Eucalyptus regnans and Eucalyptus delegatensis when sourced from Victoria. Tasmanian Oak refers to the hardwood produced by three species – Eucalyptus regnans, Eucalyptus obliqua and Eucalyptus delegatensis, when sourced from Tasmania.

Is Tasmanian oak easy to work with?

Tasmanian Oak is a light-coloured hardwood that is easy to work with and produces a beautiful warm finish. Grown in Tasmania, Tasmanian Oak consists of the same species as Victorian ash – with the addition of Messmate.

How expensive is Tasmanian oak?

Current retail prices range from $5,850 to $8,900 per cubic metre. Almost all Tasmanian oak comes from the harvesting of Tasmanian public native forests. Bringing Tas oak to market comes at the expense of Tasmanian schools and hospitals, roads and public housing; never mind the 35 years of bitter community conflict.

Is Tasmanian oak good for outdoor furniture?

Tasmanian Oak & Victorian Ash Hardwood Timber Uses Decking – provides durability and strength for outdoor decking applications. Interior Handrails – a popular choice for creating beautiful balustrades. Joinery – perfect for window frames, door frames and furniture.

What can Tasmanian oak be used for?

Uses. Decorative: furniture, linings, parquetry flooring, laminated beams, joinery, turnery. Other: sawn timber in general house framing, internal flooring, joinery.

Article first time published on

Is Tasmanian oak a eucalyptus?

Tasmanian Oak refers to the hardwood produced by three trees – Eucalyptus regnans, Eucalyptus obliqua or Eucalyptus delegatensis – when it is sourced from Tasmania. … delegatensis are known as Victorian Ash. The species are also widely known by their common names.

How heavy is Tasmanian oak?

Easy to work but not known for its durability, Tasmanian oak timbers are on average low on the Janka hardness scale at just 5.5 and relatively light with densities ranging from 650 to 1050 kg/m³ on average, but this will, of course, vary greatly depending on the ratio of the three different types of wood used to create …

Is oak good furniture wood?

Is Oak Wood Good for Furniture? The answer to this question is resounding yes. It has a few potential drawbacks, but, overall, oak is a very good choice for furniture. Oak is strong, durable and resists everyday wear and tear while offering natural beauty that fits into almost any home style.

What is the best Australian timber for chopping boards?

• Blackbutt: Light beige to honey tones.
• Bluegum: Light to medium pinky reds.
• Redgum: Medium to dark reds.
• Spotted Gum: Pale to dark browns with lots of character.
• Tasmanian Oak: Pale straw colour to medium browns.

What is the best timber for chopping boards?

Maple — specifically, sugar maple or hard maple — is the most popular choice for cutting boards. Maple is a hard, closed-grain wood. This means that it’s durable, able to resist bacteria, and features just the right amount of hardness.

What wood should not be used for cutting boards?

we would avoid open-pored woods like ash and red oak, which will be harder to keep clean from food stains. Pine might impart a resinous taste, and it’s soft so will show cutting scars from knives more easily than a harder wood like maple.

What is the best finish for Tasmanian oak?

Stained Lacquer Tasmanian Oak is best suited for this process as the timber is a light neutral colour and has the most even grain. Stain is sprayed onto the raw furniture which penetrates into the top layer of timber cells, and then a clear lacquer is applied over the top to seal it.

Is Ash or Oak more expensive?

The cost of Oak vs. Ash floors is roughly similar, though in many areas Red Oak may be more affordable because of its greater availability. It may be harder to find old-growth Ash trees as the species is being decimated by an invasive beetle in certain areas of the country making this a species that is a rare treasure.

What is the difference between American Oak and Tasmanian oak?

American Oak also takes stain/colour really well, and this brings out the striking grain. … The colour of Tasmanian Oak tends to be pale straw to light brown in colour and can often have a pinkish tinge. Over time this colour will deepen and we have found that the pink tones tend to turn attractive rich brown colour.

Is Tasmanian oak actually Oak?

Tasmanian oak refers to the hardwood produced by three trees: Eucalyptus regnans, Eucalyptus obliqua or Eucalyptus delegatensis, when it is sourced from the Australian state of Tasmania. Despite the common name ‘oak’, none of the species are in the genus Quercus.

Is Victorian ash a hardwood or softwood?

Breadcrumb. Victorian ash is the trade name of two large Victorian hardwood species, alpine ash and mountain ash, that can be used for timber framing, internal applications and furniture. Victorian ash is the trade name for two of the tallest hardwood species in the world.

Is Vic Ash good for flooring?

It is consistently strong and very versatile, making it ideal for a wide range of different uses, including flooring, joinery, and paneling, manufacturing boxes and crates, and also producing plywood.

What is the strongest timber?

Australian Buloke – 5,060 IBF An ironwood tree that is native to Australia, this wood comes from a species of tree occurring across most of Eastern and Southern Australia. Known as the hardest wood in the world, this particular type has a Janka hardness of 5,060 lbf.

Is Oak better than teak?

Key difference: Oak is considered to be a hardwood, heavy, long-lasting and expensive. Oak is also known for its strength and durability, as well as high resistance to moisture and humidity. Teak wood is another type of hardwood. … In fact, teak is famous for its high oil content, high tensile strength, and tight grain.

What is the best timber for outdoor use?

One of the most popular choices and considered by some to be the best timber for outdoor furniture, is Teak. It is waterproof, durable and resistant to sunlight. It is also an aesthetically pleasing wood. This wood does not attract any dirt and is also unaffected by insects.

What is Tasmanian oak flooring?

Tasmanian Oak flooring is light in colour, varying in colour from straw to reddish brown with intermediate shades of cream to pink. It is a warm, dense and resilient timber which can be used for many versatile applications. … Tasmanian Oak timber comes from the mountainous areas of Tasmania.

How much does jarrah flooring cost?

For individual species, expect to pay: $65 per square metre for Blackbutt. $72 per square metre for Jarrah.

What is Blackbutt flooring?

Blackbutt is an Australian hardwood with a botanical name of Eucalyptus Pilularis. Being classed as a hardwood, Blackbutt has an excellent rating on the Janka hardwood scale, making it a highly durable and resitilent flooring option.

Is Blackwood a hardwood or softwood?

Blackwood is a medium-sized Australian hardwood that yields an attractive timber often used for decorative veneers, furniture and paneling. Blackwood is a medium-sized Australian hardwood that grows in South Australia and the eastern states.

Is Oak Wood cheap?

Oak Furniture can have a very high initial cost and it makes sense for that to put someone off and go for a traditionally cheaper wood, like Pine or Rubberwood. … The cost of Oak Furniture is a trade off for the high-quality and long life-span of the material, but can still be very high and off-putting, this is true.

Is Oak a hardwood?

Examples of hardwood trees: Oak. Maple. Hickory.