You can expect the test to take approximately two and a half hours to complete with a break between the algebra and reading portion.

How long is the electrical aptitude test?

If you meet the basic requirements, you will be scheduled to take the NJATC aptitude test battery — if required. The test battery consists of two tests. It will take approximately two and a half hours to complete. The number of items and the amount of time allotted for each test are shown on the following page.

How many questions are on the IBEW aptitude test?

The IBEW aptitude test consists of two parts – math and reading. The math portion covers algebra and functions with a total of 33 questions that must be answered within 46 minutes. Now, along with the math portion you will most likely see some mechanical questions.

What is on the electricians aptitude test?

The IBEW Aptitude Test has two sections: (1) algebra & functions (2) reading comprehension. … The test has two sections: (1) algebra and functions (2) reading comprehension. Candidates should plan on spending approximately 3 hours at the test center.

What score do you need to pass the IBEW aptitude test?

Electrician applicants must take and receive a score of “4” or higher on our Aptitude Test(Electrician applicants documenting 4000 or more electrical construction hours must take the test but do not have to receive a minimum score). For more information on the Aptitude Test click here.

Is the electrician test hard?

THE CALIFORNIA ELECTRICAL CERTIFICATION EXAM IS AN EXTREMELY DIFFICULT EXAM WITH A VERY HIGH FAILURE RATE. As shown by the table above, The Electrical Certification Exam is an exceedingly difficult exam with a very high failure rate. You are permitted to take the exam up to 6 times per original application.

How long after aptitude test is the interview?

The training center will receive the results two to four weeks after your test and will notify you of the results. If you receive a qualifying score on the test battery, we will schedule you for an oral interview approximately one month following your aptitude test.

How do I study for aptitude test?

1. The Approach is the Key. …
2. Practice, Practice, and Practice! …
3. Do Not Procrastinate. …
4. Time Management During the Exam. …
5. Think Carefully and Be Confident. …
6. Use the Resources Available. …
7. Be Careful About the Trap Questions.

Is the electrical aptitude test multiple choice?

The IBEW aptitude test has gone by many names. … This pre-apprenticeship aptitude test sifts out candidates who are serious about pursuing a technical career as an electrical apprentice. The test is a computer based multiple choice test made up of two main sections: algebra and functions, and reading comprehension.

How long does it take to get IBEW aptitude test results?

You will take a short break between the Algebra and Functions Test and the Reading Comprehension Test. Approximately two to four weeks after you take the test battery, your local JATC will receive the results. They will subsequently notify you concerning the disposition of your application.

Article first time published on

Are electricians in high demand?

Demand for electricians is increasing According to the U.S. Bureau of Labor Statistics, electrician jobs are expected to grow by 11.4% from 2019 to 2029. This is more than triple the 3.7% growth rate projected for all occupations.

Do electricians use math?

Electricians must confidently use math to guide their work and comply with all industry regulations. Algebra may be used throughout the electrical installation or repair process.

How long is the JATC aptitude test?

The test is administered at our location and takes approximately two-and-a-half hours to complete. It consists of two parts: Math and Reading Comprehension.

Can you fail an aptitude test?

Can you fail an aptitude test? An employment aptitude test is not a pass or fail exam. Although there are right and wrong answers, a candidate cannot fail. Rushing through the questions or spending too long on a specific question can result in a low score.

Can you still get hired if you fail an aptitude test?

Hiring managers have to take into account the results of failed pre-employment assessment tests, especially if they feel these candidates are a great fit and should still be considered. … When applicants fail these skills-based tests, they’re deemed incapable of performing well based on their execution.

What should I wear to an electrician apprenticeship interview?

For example, for an electrician’s job interview, it is most appropriate to show up wearing clean, ironed pants and a button-down, collared shirt. Shoes should be well-polished and a matching belt should also always be worn.

What maths do electricians need?

To be an electrician requires you have to be able to make calculations relating to electrical design. It is important to have a good understanding of sums, algebra, geometry and trigonometry.

How do I prepare for an electrician apprenticeship?

1. Organize your answers for maximum impact. …
2. Prepare ahead of time by reviewing your work experience. …
3. Practice your interviewing skills! …
4. Get some sleep. …
5. Dress for success. …
6. BE ON TIME. …
7. Do your best to reduce fidgeting during the interview.

How do I join IBEW 357?

Applicants who can verify to an organizer at the IBEW Local #357, after submitting an application, that they are an honorably discharged military veteran with a minimum two (2) years of military experience in Military Occupation Specialty (MOS) applicable to the electrical construction industry and can document as long …

Is being an electrician a dying trade?

America will face a shortage of electricians in the near future, according to the U.S. Bureau of Labor Statistics (BLS) and the National Electrical Contractors Association (NECA). The trade group says that 7,000 electricians join the field each year, but 10,000 retire.

Is being a electrician worth it?

Becoming an electrician is well worth the 4-year apprenticeship. You can make a good living. In fact, electricians are the highest paid of the skilled trades, with plumbers a close second. (Plumbers may have a higher wage in some areas).

Are electricians happy?

Electricians are below average when it comes to happiness. As it turns out, electricians rate their career happiness 3.0 out of 5 stars which puts them in the bottom 29% of careers. …

What does IBEW stand for?

The IBEW, or International Brotherhood of Electrical Workers, is a non‐profit labor organization, as defined in the Labor‐Management Reporting and Disclosure Act.

Is aptitude test same as IQ test?

Simply put, an IQ (Intelligence Quotient) test measures statistically how intelligent a person is while an aptitude (General Intelligence) test measures how well that person can apply their intelligence to different scenarios.

What is a good aptitude test score?

If a perfect aptitude test score is 100% or 100 points, and your score is 80% or above, it is considered a good score. A minimum acceptable score is considered to be from 70% to 80%.

Is calculator allowed in aptitude test?

No, calculators are not allowed in any aptitude test. As purpose of most aptitude tests are checking mathematical skills and numerical aptitude.

How do you answer an apprenticeship interview question?

1. Tell us a bit about yourself. …
2. Why have you applied for this apprenticeship? …
3. What skills can you bring to this role? …
4. What would you say is your biggest weakness? …
5. Is there anything that you would like to ask us? …
6. Dress well. …
7. Turn your phone off. …
8. Maintain eye contact.

How does scoring work with the IBEW aptitude test?

Scoring. The test is scored from 1 to 9, with 9 being the highest possible score. Most apprenticeships require a qualifying score of at least a 4 to be considered for an interview.

At what age do most electricians retire?

The normal retirement age is 65 years old. May I retire before age 65? Yes, you may retire anytime on or between the ages of 55 thru 59 years old at an actuarially reduced pension, provided you are vested. If you retire on or between ages 60 thru 65 there is no reduction in your benefit.

What is the life expectancy of an electrician?

Known data has the life expectancy of American electricians at 82.3 years. The average American male lives to 78.69 years.

Is electrician a hard trade?

Electrical work is hard and can be dangerous if you don’t know what you’re doing. This is why it’s so important to have extensive training and experience working under a licensed contractor before you can be licensed to work on your own.