A small deck intended for holding a round dining table should measure at least 144 square feet. However, the average size of a deck should range between 300 and 400 square feet. Larger decks can be constructed with multi-level designs and bigger square footage depending on the space available.

How much does a 12x12 deck cost?

Deck SizeSquare FeetAverage Cost10x10100$1,500 – $3,50010×12120$1,800 – $4,20012×12144$2,160 – $5,04012×20240$3,600 – $8,400

What do I need for a 12x12 deck?

A 12 -by-12-foot deck will need 144 lineal feet of decking. The amount of individual boards will depend upon the size and type of decking your choose and the amount of space you plan to leave between decking boards.

What is a standard size deck?

The average deck size is between 300 and 400 square feet. Generally, a deck should be wider than it is deep, with the longer dimension running along the house. With large decks, consider making them multi-level designs. … I wouldn’t build a deck less than 15′ x 15′ at minimum.

What is a good size for an outdoor deck?

Most builders suggest that your deck should be no larger than 20 percent of the house’s* square footage. This is so that the deck does not overwhelm a home visually. This, of course, is up to you. If you feel you need a larger deck that takes up more of your yard space, feel free!

What is the cheapest way to build a deck?

Choose wood, but carefully: Untreated wood decks are generally the cheapest to install, but don’t forget long-term costs. Wood decks require yearly maintenance and deteriorate quickly if they don’t get it.

How do I choose the right size deck?

We recommend starting with a skateboard deck width that is proportional to your shoe size. If you wear men’s size 6.5 to 9, start out with a deck width of 7.5 to 8.0 inches. If you wear shoes 9.5 or larger, we recommend getting a deck between 8.0 and 8.5 inches.

Is it cheaper to build your own deck?

For basic deck designs using the least expensive lumber, you can expect to pay from about $8 to $10 per square foot (depending on the material) of deck area if you do the work yourself or pay about $30 per square foot if the material is professionally installed.

How much does it cost to build a 12x12 screened in porch?

Average Cost to Build a Screened-In Porch The total costs $3 to $5 per square foot for materials, and $2 per square foot for labor. If you want to build a completely new porch with screen, you’ll pay $25 to $120 per square foot for the entire project.

Is a 10x12 deck big enough?

A good size deck starts at 12 feet by 12 feet but can be as small as 8 feet by 8 feet for limited specialty use, such as a sitting area or a barbeque area just outside of the kitchen. Also deck should be no larger than the largest room in the house and not exceed 20% of the house square footage.

Article first time published on

What is the most common deck board size?

The most common or standard deck board width is 6-inch wide planks based on square-foot coverage, labor, and material cost.

What is the actual size of a deck board?

Nominal SizeActual Size5/4 × 61″ × 5-1/2″6/4 × 61-5/16″ × 5-1/2″

How many deck boards do I need for a 12x12 deck?

For example, a 12-foot x 12-foot deck of 5/4 x 6 pressure treated wood decking on 16 inches on center spacing of joists will require: A 12-foot long deck with joists 16 inches on center will require 10 joists. 20 fasteners x 26 (number of rows of decking) = 520 fasteners. Add 10 percent to be safe.

How many deck blocks do I need for a 12x12 deck?

Deck DimensionSquare Feet of DeckNumber of Deck Blocks 12″ x12″ Supporting 2000 lbs8×86448×1080410×10100410×121206

How many post do you need for a 12x12 deck?

For an attached 12 x 12′ deck, you’ll need at least 3 footings, plus at least 2 more if you’re planning on building stairs with it.

What is the average cost of building a deck?

The average price range of building a new deck in the United States can be anywhere between $4,000 and $11,000. Including materials and labor, a standard deck will cost roughly $30-$60 per square foot. That means, for a standard 14 x 20 foot deck, you can expect to pay around $6,000.

Is a deck worth the investment?

A deck is an overall solid investment that increases the value of your home, even in a down housing market. You can expect to recoup at least 70-80% of your building expenses when you go to sell your home.

How far below a door should a deck be?

If a door opens onto an open deck, meaning no or a very small roof overhang, the door should be below the level of the door – 5 or 6 inches is a comfortable height difference, shorter becomes a tripping hazard, taller becomes awkward.

Does building a deck increase home value?

In terms of pure home resale value, wood decks provide the best return on your investment. The more affordable material translates to a more affordable deck project while boosting the resale value of your home to a similar amount compared to a composite deck.

Can a deck be too big?

Deck sizing compared to your home is important, as a deck that is too large can make your house look smaller and can be inconspicuous if it is built too small. The general rule of thumb when building a deck is that it should not be bigger than the largest room in your house.

How much does a 200 square foot deck cost?

The cost to build a deck is largely dependent on the size and complexity of the deck being built. Building a deck under 200 square feet can average between $3,000 and $14,000, depending on the complexity and design of the deck.

How much is labor for building a deck?

Labor costs will total just about two-thirds of the total project cost. With contractors charging, on average, about $35 per square foot. For an average deck size between 200 and 500 square feet, you can expect to pay out between $7,000 and $17,000 just for installation and labor.

How can I save money on my deck?

1. Type of Deck. One of the first items of business before building a deck is to ask yourself what it will be used for. …
2. Deck Design. …
3. Materials. …
4. Watch the Flyers. …
5. Contractor Deals. …
6. Buy Accessories in Bulk. …
7. Deck Blocks Instead of Pouring Concrete. …
8. Seal Your Deck.

What is the cheapest material to use for a deck?

The cheapest decking material is usually pressure-treated pine, which can cost as little as $2 to $3 per square foot. There are solid wood and composite options that run $4 to $5 per square foot.

How much does a 12x12 sunroom cost?

You can expect to pay between $80 and $230 per square foot for a three-season room and $200 to $400 per square foot for a four-season room. Taking $300 as the average per-square-foot cost of a sunroom that can be used year-round, the average cost of a four-season 12×12 sunroom is about $43,000.

Does a screened in deck add value?

Though screened porches are typically not included in the appraised square footage of your home, they do add value.

What is a good size for a screened porch?

They vary quite a bit, but 12×14 and 14×16 are quite common sizes. The dimensions of the screened porch come into play more with a covered area because when you put a roof over it, it becomes defined.

How long does it take to build a deck yourself?

The average deck runs about $7,000. You can save most of that cost by putting in some serious time and sweat equity. A 12 x 24-foot one typically requires two people to complete and will take anywhere from one to three weeks depending on experience and skill level.

How many posts do I need for a 10x10 deck?

A freestanding 10′ x10′ deck needs 4 posts, supporting two pairs of 2-ply non-incised 2×8 beam, upgrading the beam to 3-ply using incised wood.

How do you calculate wood for a deck?

Length x Width = Square footage of decking needed. Square footage is calculated by multiplying length by width. Simple enough, but decking is sold by the linear foot not by the square foot. To convert it you need to know how many square feet is in a linear foot of decking.

How wide is a 7.75 skateboard?

Deck Width (in)Suggested Truck Axle Width (in)7.25 – 7.6257.47.4 – 7.8757.67.6 – 8.07.75 / 7.87.75 – 8.258.0