The solid chainsaw bar production begins with a solid bar of steel. The machine laser cuts the steel to the desired basic shape. That includes the outer contour, bores, and elongated hole. Looking at the process, the laser makes very little waste in the cut, and Stihl even reclaims the leftover steel.

Can you drill a chainsaw bar?

Re: Drilling a Chainsaw Bar Drilling that bar may not be as difficult as you think. It will be best if you use a drill press, start with a pilot hole, and then drill to the size you need. Make sure you have a sharp bit, run at the lowest speed you can, and use cutting fluid.

Are chainsaw bars heat treated?

Tsumura chainsaw bars are manufactured and assembled using advanced technology machines and salt heat treatment to provide high standards of durability, strength, finish and accuracy. … The salt bath heat treatment is the best way to achieve ideal steel which has toughness and hardness.

Are Stihl chainsaw bars Solid?

The STIHL ROLLOMATIC® E Super guide bar is a solid-machined bar made of high-grade steel with the groove milled out and a replaceable sprocket nose assembly riveted in place.

Is a chainsaw bar high carbon steel?

The steel in most chainsaw bars is high-quality steel that will keep an edge well, but has enough flex to bend under stress rather than break or crack. The metal is generally corrosion resistant, and many bars are a stainless-steel alloy.

Why is there a hole in a chainsaw bar?

The hole is part of the manufacturing process when the bar is made at the factory. The milling and heat tempering machines anchor to it and the tail slot. Making a living with a saw since age 16.

What steel is chainsaw chain made of?

A chainsaw, as you probably know, is a large gas-powered saw with a rotating blade in the form of a chain that continuously cycles down the length of the saw’s guide bar. Average chain links are made from a large press machine that stamps them out of sheets of stainless steel.

How much does a 25 inch Stihl bar cost?

This item Stihl 3003 000 8830 Chainsaw Bar, 25″STIHL 2 in 1 Easy File Chainsaw Chain Sharpener 3/8Add to CartCustomer Rating4.7 out of 5 stars (54)4.7 out of 5 stars (1288)PriceFrom $95.72$49.95$49.95Sold ByAvailable from these sellersKIBS group

How big a tree can you cut with a 16 chainsaw?

16 chainsaw would cut through a 14″ tree diameter. 10 inch chainsaw for 8″ in diameter. 6 inch chainsaw can cut a 4″ diameter.

Can you put a Husqvarna bar on a Stihl chainsaw?

Husqvarna Large mount bars are often an excellent match for Stihl 3003 mount saws. They can also be made to fit together, although this involves widening the mounting slot and takes some work. Mounting slot: The Husqvarna Large bar mounting slot is too narrow for the Stihl 3003 bar studs (9 mm vs. 12.1 mm).

Article first time published on

What is the longest bar Stihl makes?

The Stihl chainsaw pictured above has a 72-inch bar on it. A 72-inch bar is the longest bar that is commonly found for chainsaws, though they are not readily available.

What is a laminated chainsaw bar?

Laminated Chainsaw Bars. Whereas solid bars are made from one solid piece of steel, laminated bars are made by joining two steel rails with a steel core and a sprocket between them. What solid bars offer in sheer strength, laminated bars offer in higher flexibility.

What does full chisel chainsaw chain mean?

A full chisel chain is designed for the fast cutting action. In comparison to the semi-chisel chain, this chain has square-cornered teeth which makes it more aggressive when cutting.

Can you put a 18 inch bar on a 16 inch chainsaw?

Yes, but you need a bar designed to fit on your saw. There are different designs for different saws, and the bar has to match the chain/sprocket configuration as well.

How tight should chainsaw bar nuts be?

The chainsaw chain should feel snug but still pull freely. Finally, perform a “snap” test to ensure proper saw chain tension. Simply pull the chain on the underside of the guide bar down so one or two drive links are out of the guide bar rails and release it. The chain should snap directly into position.

How tight should a chainsaw chain be?

A properly-tensioned chainsaw chain should still be just a little loose on the chainsaw guide bar, but the chain needs to be tight enough that you can’t pull the drive links out of the bar nose.

Can you flip a chainsaw bar?

Every chainsaw bar has been designed to be mounted right-side up or upside down. The reason for this is that it allows the user to extend the life of his chainsaw bar by 50%. Flipping the bar will give the heavily-used areas some relief from wear and tear. … This reduces a chainsaw’s ability to cut accurately.

How do I keep my chainsaw running well?

1. Keep It Clean. The more you use your chainsaw, the more likely you’ll see debris stuck to it, from sawdust and tree sap to globs of oil. …
2. Sharpen the Blades. A dull chainsaw just won’t do. …
3. Make Sure Your Chainsaw Is Lubricated. …
4. Use New Gas.

Can you straighten a bent chainsaw bar?

Solid body bars with replaceable noses can be straightened by hammering with the bend peak up on a flat anvil. Laminated bars need a piece of rubberized belting of approximate 1/4″ thickness between bar and anvil to properly hammer straighten .

Can an electric chainsaw cut down a tree?

A powerful gas or electric chainsaw can quickly cut fallen trees and logs into valuable firewood.

Is Husqvarna better than Stihl?

Side-by-side, Husqvarna edges out Stihl. Their safety features and anti-vibration technology allow for easier and safer use. And although Stihl chainsaw engines can have more power, Husqvarna chainsaws tend to be more efficient and better at cutting. As far as value goes, Husqvarna is also a top pick.

How do you measure a chainsaw bar length?

To find the called length of your chainsaw bar, measure it from its front tip all the way back to the cutter closest to the body of the saw. Round this measurement up to the nearest even number in inches. For example, a bar that measures 18 3/4″ will actually have a called length of 20″.

Are Stihl chainsaw bars laminated?

The standard version of the STIHL ROLLOMATIC® Ematic™ bar consists of three electrically welded metal plates (laminated guide bars). The ROLLOMATIC® E is a general-grade laminated guide bar made of high-grade steel. … All STIHL ROLLOMATIC® bars designed with a narrow nose help reduce kickback tendencies.

What is a chainsaw guide bar?

Guide bars provide precise guidance to the chainsaw with minimal friction loss. They have to take on the toughest jobs without warping. The two basic types − the Rollomatic and Duromatic − have been designed to handle different requirements and areas of application. Rollomatic bars are ideal for everyday use.

What is the tail mount on a chainsaw bar?

Tail: this is the part of the guide bar that fits inside the body of the chainsaw. Mounting slot: a shaped hole that connects the guide bar to the machine by means of large screws with threaded ends (studs). Adjuster hole: this houses the pawl needed to adjust the chain tension.

Will a Poulan bar fit a Husqvarna?

The older Poulan bar slot is for larger bar studs which will fit on the smaller Husqvarna 435. Just needs a homemade wire adapter to snug it up. Poulan bar may oil through its adjuster hole, if not easy to drill a new hole. Only thing to worry about is chain pitch size and drive link gauge thickness.

Will a Stihl chain fit a Poulan saw?

Product Description. STIHL 63 PM3-56 chainsaw chain made in Switzerland with high quality steel. This chain fits Homelite, Poulan, Echo, Craftsman, Remington and others with the same specs.

How much does a STIHL 881 cost?

$1,969.99. The largest and most powerful chainsaw in the STIHL lineup. For the largest, toughest and most demanding jobs, professionals can find the performance they need in the MS 881 chainsaw.

What is a magnum chainsaw?

Simply the most power of any STIHL professional chainsaw, the MS 880 MAGNUM® still boasts a great power-to-weight ratio for a big saw that’s surprisingly nimble, thanks to STIHL engineering. Ideal for felling and bucking large diameter trees, this saw is precision balanced with excellent handling and reliability.

What is the most powerful chainsaw on the market?

The world’s most powerful production chainsaw. A direct replacement of the MS 880, the MS 881 is the most powerful chainsaw in the market with the highest displacement (121.6 cc) and engine power (6.4 kW). Built for high performance work, this saw is the optimum choice for professional foresters and loggers.

How long should a chainsaw bar last?

Re: how long does a bar last The next, a Granberg, lasted about 2 months. About that time Stihl started using them with the same results. A good bar can be filed a few times on both sides and the tip replaced when needed. They could last almost as long as the saw.