Liners are fabric-covered moulding, used inside the outer moulding in a frame design. … Liners often are used in place of mats on framed canvas prints or oil paintings that do not require glass or acrylic glazing. Liners serve much the same visual purpose as a mat, separating the work from its frame.

What are the parts of a picture frame?

The four most important framing components are the moulding (material the frame is made of), the matboard, the glaze and backing.

What do you put behind a picture in a frame?

Depending on what you’re framing; you can use cardboard, standard foam board, acid free foam board, mat board, hard board, chip board, easel backs, or what the heck, you can even use wood.

What is the cardboard inside a picture frame called?

Matboard: In the picture framing industry, a mat (or mount in British English) is a thin, flat piece of paper-based material included within a picture frame, which serves as additional decoration and to perform several other, more practical functions, such as separating the art from the glass.

How do you get a picture to stay in a frame?

Many styles of wide tape will work, but a fabric or paper tape is ideal. It is relatively inexpensive, but often sold in packages of multiple rolls. Apply the tape so it covers approximately half an inch of the frame, and as much or more of the backing. Press firmly to ensure a good seal.

What is backing board for picture frames?

A backing board is using in picture framing to form the back-most part of the frame contents. It is placed behind the glazing, mat, and art, and may be hinged to the artwork itself.

What is backing board?

Backing boards can be described as any stiff material fastened to the reverse of a painting’s stretcher or strainer and whose function is protection from various physical and environmental hazards.

What is matting in frame?

In the picture framing industry, a mat (or matte, or mount in British English) is a thin, flat piece of paper-based material included within a picture frame, which serves as additional decoration and to perform several other, more practical functions, such as separating the art from the glass.

What can I use instead of a mat board?

Use alternative forms of matboard: Scrapbooking papers (a wide selection can be found at any craft store), recycled, vintage papers (see above!), or even swatches of thick fabric can all be used to mat art and photography.

What is mat in art?

A mat is a flat and usually thin piece of material included or sold separately from a picture frame. Mats usually serve one of two purposes; additional decoration to make your art pop or they’re used to separate the artwork from the glass frame. … The purpose of matting is to protect artwork & add appeal.

Article first time published on

What tape do picture framers use?

1 Sealing The Frame There are two types of tape used:self adhesive;gummed. Gummed tape is the traditional paper tape, and the only one suitable for conservation work and museum work, is gummed paper tapes.

What is mounting and matting?

Photographic prints that will be hung on a wall or placed in a portfolio can be shown in a variety of ways. Mounting, matting or framing the print asks the viewer to consider the image more as an object and as a substantial artwork. …

What is backing board used for?

Cement backer board, also called a cementitious backer unit or CBU, is commonly used to form a base for ceramic tile. Because cement backer board is porous, thinset, grout, and mortar adhere well to it. Backer boards can be nailed or screwed into studs or cinderblock, brick mortar, or concrete.

Why do frames have paper backing?

A dust cover, also called backing paper, is a thin sheet of paper attached to the back of picture frames. … They also prevent bugs from making a snack of your artwork as well as keep the humidity levels from fluctuating too much within the frame, both of which can permanently damage artwork.

How thick should backing board be?

For flooring, the backer board should be installed over a 5/8-inch thick OSB or plywood base. For countertops, use 3/4-inch plywood beneath the backer board. And for walls and ceilings, apply 1/2-inch or 5/8-inch backer board screwed directly to the wall studs or joists.

Is mat board the same as Mount Board?

Much like mat board, mount board serves to protect a framed photograph or piece of artwork by providing a rigid, sturdy backing to keep photographs and artwork from moving or warping in the frame. The location of mount board is basically the opposite of mat board.

What is foam core backing on a frame?

Also called foam core or backing board, mounting board is a strong, stiff board consisting of a lightweight foam within outside layers of paper. It supports artwork within a frame, and provides a smooth surface onto which the art can be mounted.

Can you buy backs of picture frames?

Our picture frame easel backs will transform your frame into a tabletop treasure to adorn your table, shelf, desk or mantelpiece with your most cherished images. A snap to install, our easel backs are available in four of the most popular tabletop sizes.

What is a backing mat?

Backing boards come in any size. Backing is used to provide support and protection for your artwork, either in a picture frame or as a standalone product in a show kit. … The larger your artwork, the more support you need. Foam is much thicker than the economy backing and is the most popular for use in.

Why are mat boards so expensive?

Simply put, the larger it gets, the more materials are used and of course, the price goes up. As size increases, larger and larger pieces of glass are needed and because of fragility, our actual costs per square inch go up as well. Mat boards come in basically two different sizes 32″ x 40″ and 40″ x 60″.

When should you mat a picture?

Photographs, whether large or small, are often complemented by the addition of a mat. A mat can give an elevated or sort of “focused in” look to the photograph. Custom framing heirlooms, textiles or items other than canvas or paper usually will benefit from a “floating” mat.

Can you remove mat from frame?

Carefully lift the mat from all sides to open it and reveal the artwork below. Try not to touch the artwork itself. Once you’ve removed the artwork from the frame, take lots of photos. … If this is the case, do not try to detach the work from the mat yourself because you risk damaging the artwork.

How do I choose a mat and frame?

1. Step 1: Determine The Size Of Your Picture. …
2. Step 2: Select A Mat Board For The Picture. …
3. Step 3: Pick The Right Thickness For Your Picture Frame. …
4. Step 4: Measure The Size Of Your Picture Plus The Matting. …
5. Step 5: Choose The Right Effect.

What is matting a painting?

Matting is a border that surrounds artwork. It is usually made from matboard, a type of board manufactured especially for this purpose. The matboard is cut to size, then one or more holes (openings) are cut in the matboard to serve as windows for displaying art.

When to use a mount in a frame?

A mount is a great way to provide a level of ‘breathing space’ in between your artwork and the frame itself. This is especially useful in situations where your artwork is very close to the edge of the medium it is printed on. Let’s say you have a print which is exactly A4 (210 x 297mm to be precise) in size.

How do you attach art to backing board?

The most simple adhesive method to attach the art to the mat is to simply attach a few strips of tape across the back of the art and matboard. Remember to only tape the top edge.

How do you float a picture in a frame?

1. Step 1: Cut the mat board to the size of the frame. …
2. Step 2: Mark where you want the picture to go. …
3. Step 3: Cut a slit a little narrower than the picture. …
4. Step 4: Apply hinging tape to the back of the picture. …
5. Step 5: Slide tape through the slit and secure on the back. …
6. Step 6: Frame the picture and add spacers.

What is backing paper?

Backing sheets are usually made of paper, although film may be used in order to reduce the overall thickness of a sheet of labels and to provide a base that is stronger and more durable – which is particularly important during the die cutting process – than paper.

Is framers tape double-sided?

Adhesive transfer tape, or ATG tape, is a type of double-sided adhesive used extensively in picture framing to secure mat boards and dust covers. This tape creates a strong, durable bond with plastic, metal, vinyl, cloth, and other materials, making it ideal for framing and even other home projects.

Can I use masking tape for framing?

Masking tape should NEVER be used in any quality framing job. Artwork should NEVER be attached directly to the front mount. This is an amateur attempt at a professional job. Masking tape should be used for keeping paint off windows, not for framing!

What is photo mounting?

Photographic mounting describes a process of using adhesive to fix a photo print to a solid rigid material, known as a substrate. The type of photographic mounting we use at Metroprint uses large rollers to seal photographic prints to a substrate, as opposed to other warm techniques, such as heat mounting.