EPA regulations (40 CFR Part 82, Subpart F) under Section 608 of the Clean Air Act require that technicians who maintain, service, repair, or dispose of equipment that could release ozone depleting refrigerants into the atmosphere must be certified.

What does a 608 certification allow you to do?

Section 608 technician certification is required to dispose of appliances, except for small appliances (an appliance that is fully manufactured, charged, and hermetically sealed in a factory with five pounds or less of refrigerant), motor vehicle air conditioners (MVACs), or MVAC-like appliances.

How much does 608 certification cost?

Local 501 MemberNon-MemberExam$0$75.00Total$0$240.00

How do you get a 608 certification?

To get your EPA 608 certification, you must pass an exam administered by an EPA-approved certifying organization. It is important to note that the exam is not administered by the EPA directly. Once you pass your exam, you receive your EPA 608 certification card in the mail.

What is a 608 and 609 certification?

Refrigerant Sales Restriction Section 608 technician certification is required to purchase ozone depleting or non-exempt substitute refrigerants, such as HFC refrigerants. Section 609 technician certification is required to purchase CFC-12 or EPA-approved substitutes for MVACs containing an ODS.

How do I become EPA certified?

Technicians are required to pass an EPA-approved test to earn Section 608 Technician Certification. The tests are specific to the type of equipment the technician seeks to work on. Tests must be administered by an EPA-approved certifying organization. Section 608 Technician Certification credentials do not expire.

How long does it take to get EPA 608 test results?

After passing the test, you will become EPA certified! *TEST RESULTS WILL BE MAILED WITHIN 2-3 WEEKS. The ESCO Institute Section 608 EPA Preparatory Manualcovers all questions contained on the EPA test.

How many questions are on the EPA 608 test?

The Testing Format The EPA 608 Type I exam consists of 50 multiple choice questions in total. Half of these questions are for the Core section of the exam, while the other 25 multiple choice questions are for the Type I portion of the exam.

How much does it cost to take the EPA exam?

* Exam price is $24.95 for the first attempt and $5.95 for each additional attempt. This cost includes one wallet-sized certification card. ** EPA 609 MVAC Certification costs $19.95 for the first attempt and $4.95 for each additional attempt. This cost includes one wallet-sized certification card.

What are the different types of EPA certification?

There are four types of EPA certification: Type I, Type II, TYPE III, and Universal Certification.

Article first time published on

Can I take the EPA test online?

Can You Take EPA 608 Online? Yes! Since the Type I Certification is open book, you can study and take your test online right now. If the appliances you are working on exceed five pounds of refrigerant, the test will need to be proctored.

How hard is the EPA 608 exam?

Passing the EPA 608 exam is not hard, especially if you can memorize things easily. Not to say it is a cake-walk, but many people stress about it more than they need to. What Is the EPA 608 Exam? The EPA 608 exam is for HVAC technicians to understand refrigerant recovery, disposable, storage, fines, etc.

On what does universal EPA certification allow a service technician to work?

On what does universal EPA certification allows a service technician to work? All types of systems and all types of refrigerant, except mobile air conditioning. … When one or more of the refrigerants in the blend will condense or evaporate at different rates than the other refrigerants.

What is a universal EPA license?

A Universal certification means you have passed all four sections – it’s another way to say you are certified as a Type I, II, & III technician. There is not a Universal section of the test. … The certifications never expire. Technicians should read the entire EPA regulations before handling refrigerants.

Do you need EPA certification for r410a?

Are you required to have a license or to be certified to handle and purchase R-410A? You are required to have an EPA Section 608 Type II or Universal certification license to handle R-410A but no license is legally necessary for purchase.

What is EPA test?

This means that the United States Environmental Protection Agency has examined the work that the company does and has certified that they are meeting the EPA’s standards for protecting the environment.

How much does a CFC certification cost?

Again, to access and order the CFC test, applicants will need to be a PSA Member or will need to create a free Course/Test account on the PSA web site then login and pay $60 for the course.

How do I verify my EPA 608 certification?

To easily verify a technician’s certifications, enter their NATE ID number here. Technicians who wish to opt out of being included in the list are asked to email [email protected]

What EPA certification do I need to buy refrigerant?

Refrigerant can only be sold to technicians certified under the Section 608 or Section 609 technician certification programs, where individuals may only purchase refrigerant consistent with the appliances covered by their certification.

How long does it take to get your EPA certification?

EPA is required to process your application to be a lead-safe certified firm within 90 days of receipt. In most instances, properly-completed firm applications are processed in about one month.

How do I get my EPA test results?

Candidate – EPA Results. When you took your VGI Module 0200 test, you were asked to supply a Personal Identification Number or (PIN). To look up your test results, enter your Candidate ID number (###-##-####) and your PIN number (###). As test groups are graded, these records are updated instantly thoughout the day.

Which HC refrigerant is allowed for use in new domestic small appliances?

Hydrocarbon R-600a is an approved refrigerant for new household refrigerators, freezers, and combination refrigeration/freezers.

How many questions is the EPA 608 Type 2?

Trade Category:HVACRTest Category:EPA 608 CertificationTest Subject:Type II (High-Pressure / Very High-Pressure)Test Number:1 of 4Questions on Test:25

What type of equipment can be worked on with Type III certification?

Type III Certification – Can only work on Low-Pressure Appliances.

How do I check if someone is EPA certified?

Checking Someone Else’s Certification Look on the card for the certification number. Usually they only have to present their certification card to ensure that they are certified. The card will have their name, the date they became certified or took the certification test and an expiration date (if applicable).

Is EPA test legit?

Very good training, online program was very helpful. Overall it was fast, easy and convenient and I would recommend it to anyone who is interested in getting there licenses. Yes, I would recommend this program to a friend.

How do I become an EPA 608 Proctor?

To be approved as an EPA proctor, you must be a regular employer (not an independent contractors or sole proprietor) of a legitimate business entity that has been in operation for more than a year, has a sufficient business presence, and is in good standing with the Secretary of State.

What certifications do I need for HVAC?

Two primary types of certification are available for HVAC technicians: EPA Section 608 Technician Certification and industry organization certifications.

What can happen if I don't have a refrigerant certification?

Selling refrigerant to an individual or company that is not complying with this requirement could result in enforcement action against you or your company. The seller of the refrigerant is responsible for verifying that the buyer either 1) is a certified technician, or 2) employs a certified technician.

On what does a Type III EPA certification allow a service technician to work?

Type III – Type III EPA 608 licenses allow HVAC workers to focus on low-pressure appliances. It requires expertise with leak detection and fixes, disposal of refrigerants, safety, and recovery techniques. Some low-pressure appliances use nitrogen, so technicians need to have extensive knowledge about this chemical.

What is a NATE certification?

What is NATE Certification? NATE is a coalition made up of the U.S. Environmental Protection Agency and ASHRAE® (the American Society of Heating, Refrigeration and Air-Conditioning Engineers). The organization certifies heating, ventilation, air conditioning and refrigeration technicians with a series of tests.