Definition of lock strike : a metal fastening on a doorframe into which the bolt of a lock is projected to secure the door.

Are electric strike Fail Safe?

A fail safe electromechanical lockset is locked when power is applied and unlocked when power is removed. When power is removed, the lever can be turned to retract the latch. Fail safe electromechanical locks are used for stairwell doors providing re-entry.

Do you need an electric hinge with an electric strike?

Your hinges must be compatible with other devices such as electrified mortise locks, electrified cylindrical locks, delayed egress exit devices, electric trim, and electric strikes for door pairs. Additionally, you’ll want to ensure hinge compatibility of power control inputs for electric locks.

How do electric strikes work?

Electric strikes replace a standard door strike and is connected to a power supply. When an electric strike is activated, it releases the latch, unlocking the door. Electric strike locks remain locked from the outside at all times. When the door closes behind you, it automatically returns to a locked position.

Can you put an electric strike on a double door?

6100 Series Electric Strike The 6100 Series are heavy-duty stainless steel construction rim exit strikes. They are ideal for drop-in replacement or new construction with five models providing coverage for many single or double door applications, including fire-rated doors.

What is the secure side of a door?

First off – The hand of a door is determined from the “secure” side of the door. The secure side is the side from which you unlock and enter (the “key side”). Determine if the door is to be opened by pushing away from you or pulling towards you.

What is the difference between electric strike and magnetic lock?

The primary difference between electric strike locks (door strike) and magnetic locks (maglocks) is their power requirement. Maglocks are fail-safe, while electric strikes are generally fail-secure. In other words: Magnetic locks require power to lock the door, whereas electric locks require power to unlock the door.

What is a magnetic door lock?

Magnetic locks use electromagnetism to control the entire locking mechanism. When the magnet is energized, it bonds to the armature and locks the door. To allow access or egress, a switch must be provided to de-energize the magnet. As the electric power activates the magnet, the bolt locks the door.

How does a strike plate lock work?

Electric strike locks works by replacing the standard strike (the metal plate with a hole in it that’s in the door frame) with an energized strike in which one side is cut out and replaced with a hinged piece of metal. … With this type of lock, the door closes behind you and automatically fastens in a locked position.

How does a door lock buzzer work?

Buzzer lock uses low voltage (8-16VAC) non-polarized plug-in power supply with surface mounted exit button, mounting U-Tabs, door chime & 50′ of 4-ply 22 gauge wire. The electric door strike remains locked until the electric strike is electrically activated with its included exit push button.

Article first time published on

What is an electrified mortise lock?

Electrified Mortise Locks are simply standard mortise locks equipped with a solenoid that keeps the latchbolt from retracting (usually only from the unsecure side). … In fail-safe mode, power must be applied to lock the lock, whereas in the fail-secure mode power must be applied to unlock the lock.

How do you open a locked electric door?

On some electronic locks, you don’t press the Enter button again; you instead should press the End button. Pull down the handle on the safe or pull the steel bar off your lock to access your valuables.

Do you need an electric strike and electric lock?

Electric Strikes in Fire-Rated Openings For stairwell openings that must be unlocked in the event of a fire yet positively latched, the answer is simple: one must use an electric lock (or exit device trim) because there is no fail safe, fire-rated electric strike.

What is an electric hinge used for?

Electric hinges are used when a locking device is mounted on a moving door and power and signals must be brought off the door to the controller and house wiring.

What is a door power transfer?

An EPT is an electrical power transfer, which is used to transfer wires from the door frame to the edge of the door. … The EPT is concealed when the door is closed (the door loop is exposed and prone to abuse) and it can accommodate larger gauge wires than an electric hinge.

Is a door strike normally open or normally closed?

It is normally closed and it releases the latch that locks the lock when voltage is applied AC or DC. But you would still need to pull the door to defeat the spring mechanism.

What is a Deadlatch lock?

A deadlatch is a type of lock that can automatically lock itself without needing a key or a knob to move the blot in place. Essentially, it contains its own security latch which can immediately lock itself as soon as you close your door. … A key must be used to unlock the door from the inside.

What is a door latch?

Door latches are a type of mechanical hardware used to fasten doors and keep them shut. A door latch uses a fastener attached to two ordinarily separated surfaces, most often the door and the frame, to prevent the door from swinging while still allowing normal operation when the latch is released.

How strong are electromagnetic door locks?

Because the mating area of the electromagnet and armature is relatively large, the force created by the magnetic flux is strong enough to keep the door locked even under stress. Typical single door electromagnetic locks are offered in both 600 lbs. (2669 N) and 1200 lbs. (5338 N) dynamic holding force capacities.

How good are magnetic locks?

There are many benefits to using a mag lock system for your commercial property: Mag Locks can be extremely strong and durable, lasting a long time. Mag Locks be mounted on a wide variety of doors, even glass doors. These locks often require less cutting of the door frame during installation.

What is a leaf on a door?

A “leaf” is just another term for a single door. Since there are two doors in a pair, there are two “leaves” in a double door opening.

How do you know if a door is RH or LH?

1. Push the door away from you as if you are going to walk thru the opening. If the hinges are on your right, it is a RH door. …
2. If you are on the pull side (hinge side) of the door, and the hinges are on your right, it is a LH door.

What does right hand in swing mean?

That means you’re on the inside of the room not on the exterior side like an in-swing door. Stand with your back to the door. If your right hand is on the doorknob side, it’s a right-hand swing. If your left hand is on the doorknob side, it’s a left-hand swing.

What is a deadbolt strike?

When the door is closed, the latch “strikes” a curved piece of metal (called the Lip). The purpose of the Lip is to push the spring loaded latch back into the door until the door is completely closed. … Most deadbolt locks have a 1 inch (25.4mm) bolt or bar that extends into the door frame after the door is closed.

Do strike plates come with door knobs?

Yes, it comes with strike plate and screws.

What is the hole in the strike plate called?

Box & Strike Plate The bolt extends from the cylinder into a small square shaped hole—this is the “box”. It is designed to hold the bolt securely in the doorframe when the lock is engaged.

Do magnetic locks work on doors?

Not unlike what you learn about magnetics, magnetic locks work by north and south end meeting and sealing, but magnetic door locks use an electrical current to produce a stronger magnetic force. Magnetic door locks use an electromagnetic force to stop doors from opening, so they are ideal for security.

How does a magnetic door catch work?

The catch has a retaining clip in its body so when the door is pushed against it, the magnet holds the door in place. When the door is pushed back fully, the retaining clip within the catch clicks into place and the door is held shut.

How do you open a magnetic door lock without a key?

1. Smoothly press the handle or button until the device is open.
2. Find a thin ruler, plastic card, knife, knitting needle, or nail file, and pull the tab.

How much does a buzzer system cost?

A door buzzer system costs anywhere from $1,000 to $7,000 for the hardware.

Does an electric strike require a power supply?

Electric strikes require a power supply to function. Electric strikes have some type of keeper, or gate, for the latching mechanism on the lock. When a credential is presented and the strike is disengaged, the gate on the strike will allow the latch to be pulled through the gate.