A handheld blood analyzer that delivers lab-quality, diagnostic results in minutes. Lightweight, portable and easy to use, the i-STAT 1 blood analyzer operates with the advanced technology of i-STAT test cartridges.

What tests can be done on Istat?

i-STAT test cartridges are available for a broad range of diagnostic and treatment indicators including blood gases, electrolytes, metabolites and coagulation markers. Blood samples do not need to be processed before testing and results are available in around 2 minutes.

How much does an Abbott I-STAT cost?

ABBOTT LABS I-STAT 1 is one of the 25 best-selling Analyzers electrolytes and blood gas. The Current Price Range Based on 12 Vendors on Bimedis. It’s Costs Starts Approximately at $1,300 and ends at the Highest Price $6,500. The Average Price for ABBOTT LABS I-STAT 1 – $3,648 Based on 51 Listings of This Product.

How does the Istat work?

Description. The i‑STAT is a handheld, in vitro analyser designed to be used at the patient’s bedside (point‑of‑care) for testing arterial, venous or capillary whole blood. It takes single‑use cartridges containing chemically sensitive biosensors on a silicon chip that are configured for test‑specific indicators.

What is I-Stat Chem 8?

The CHEM 8+ i-STAT cartridge is a single-use in vitro diagnostic test contained in a pocket sized cartridge. It performs a battery of tests and is designed for the i-STAT 1 Handheld Analyzer system. The sample is applied while the cartridge is outside the device for greater ease.

How accurate is an Istat?

The i-STAT® manufacturer also recommends “haematocrit adjusting” using total plasma protein level to adjust the i-STAT®- measured Hct. This resulted in acceptably accurate Hct measurement (mean 0.53% with 1.46% standard deviation).

Is Istat waived?

The i-STAT CHEM8+ cartridge contains nine measured assays (sodium, potassium, chloride, blood urea nitrogen (BUN), ionized calcium, TCO2, glucose, creatinine and hematocrit) and is categorized as a CLIA waived test for venous whole blood samples, meaning this cartridge could be used in a facility with a CLIA …

How do you fill an Istat cartridge?

For glucose test strips, fill to capacity a syringe or collection tube containing lithium heparin, sodium heparin, or EDTA. Mix blood and anticoagulant by rolling syringe between palms for at least 5 seconds each in two different directions, then invert the syringe repeatedly for at least 5 seconds.

How long are Istat cartridges good for?

i-STAT cartridges have a 14 day room temperature expiry except for CG8+, EG6+, CG4+ blood gas cartridges which have a 2 month room temperature expiry. Mark the cartridge box or cartridge pouches with the room temperature expiry date.

What is a stat machine?

The Abbott i-STAT portable clinical analyser is a true Point Of Care analyser designed to be used at the patient’s bedside for critical care tests such as blood gases, electrolytes, metabolites and coagulation. … Only a few drops of whole blood are required for testing, between 65 and 95 µl.

Article first time published on

What is a Chem 14 Blood Test?

Comprehensive metabolic panel (CMP) is a series of blood tests that give your doctor a snapshot of your body’s chemistry and the way it’s using energy (your metabolism). It’s also called a chemistry panel of Chem-14, chemistry 14, or chemistry screen. Most people get a CMP as part of their yearly checkup.

Can you have coffee when you fast for blood work?

Can you drink coffee if you’re fasting before a blood test? Even if you drink it black, coffee can interfere with blood test results. That’s because it contains caffeine and soluble plant matter, which might skew your test results. Coffee is also a diuretic, which means that it will increase how much you pee.

How much does iSTAT cartridge cost?

An iSTAT cartridge cost of 420 dollars would not have been different from laboratory costs. Cost-saving on technician callback (1,530 dollars), paramedic overtime (690 dollars) and aircraft time waiting charges (2,000 dollars) would have totaled (4,220 dollars).

Is i-STAT FDA approved?

Abbott has secured the US Food and Drug Administration (FDA) 510(k) approval for i-STAT Alinity Plasma Test, a rapid handheld blood test to detect traumatic brain injury (TBI), including concussions.

How often is QC i-STAT?

The electronic simulator is a quality control device for the analyzer. Every 8 hrs the i-Stat analyzer automatically performs a check using an internal electronic simulator. The i-Stat has a QC lockout mode, meaning patient testing can not be performed if the electronic simulator test has not been done for 8 hours.

How long do the cartridges need to sit at room temperature before you can use them?

All cartridges should stand at room temperature for 1 hour before use (an entire box). Individual cartridges can be used after standing just 5 minutes at room temperature. § Verify that the cartridges stored in the refrigerator are all within the expiration date printed on the boxes.

How does Abbott i-STAT work?

The i-STAT is a cartridge-based analyser with all the analytical requirements for the performance of a test contained within an individual cartridge. The test sample and reagents never enter the ‘analyser’ which transforms electrical signals from the test cartridge into human-readable results.

How quickly should you aim to apply blood to the i-STAT cartridge and load the cartridge into the instrument when performing a PT INR test?

Applying the sample Perform a fingerstick and immediately (within 15 seconds) apply the first drop of blood to the sample well. Once in contact with the sample well, the blood will be drawn into the cartridge.

How does point of care testing work?

Point-of-care testing, also known as near-patient testing, typically means carrying out a test using a device or test kit in the presence of the patient and without the need to send a sample to a laboratory. Many new point-of-care devices utilise technological advancement to improve the quality of care.

What Alt is too high?

What ALT level is considered high? The upper limit of normal for ALT is 55 IU/L. When an ALT level is double to triple the upper limit of normal, it is considered mildly elevated. Severely elevated ALT levels found in liver disease are often 50 times the upper limit of normal.

What is Chem 6 blood test for?

This blood test gives information about your body’s metabolism, or how your body uses food for energy. It gives a snapshot of the health of your kidneys, your blood sugar levels, and the levels of key electrolytes, such as potassium and sodium.

What is iron labeled as on blood test?

Different types of iron tests include: Serum iron test, which measures the amount of iron in the blood. Transferrin test, which measures transferrin, a protein that moves iron throughout the body. Total iron-binding capacity (TIBC), which measures how well iron attaches to transferrin and other proteins in the blood.

What should you not do before a blood test?

Why do I need to fast before my blood test? If your health care provider has told you to fast before a blood test, it means you should not eat or drink anything, except water, for several hours before your test. When you eat and drink normally, those foods and beverages are absorbed into your bloodstream.

What should you not eat the day before a blood test?

Fasting means you don’t eat or drink anything but water usually for 8 to 12 hours beforehand. If your appointment is at 8 a.m. and you’re told to fast for 8 hours, only water is OK after midnight. If it’s a 12-hour fast, avoid food and drink after 8 p.m. the night before.

How much water should you drink before a blood test?

This is generally the case for blood tests and surgeries. If your phlebotomy specialist says it is OK to drink water before getting blood drawn, try to drink the recommended daily amount of water, which is 64 ounces. Before you donate, drink a glass of water that’s about 16 ounces.

Does BMP have potassium level?

The basic metabolic panel (BMP) is a blood test that gives doctors information about the body’s fluid balance, levels of electrolytes like sodium and potassium, and how well the kidneys are working.

Is a chem 7 the same as a basic metabolic panel?

This test is known by multiple names—including a sequential multi-channel analysis with computer 7 (SMAC7) or metabolic 7—but most medical professionals refer to it as either a Chem 7 or basic metabolic panel (BMP). A comprehensive metabolic panel (CMP) similar but includes six additional tests.

What is a Chem 12?

Lab medicine A battery of 12 clinically important tests on serum analytes, which are often ordered together–albumin, alk phos, AST, calcium, cholesterol, glucose, LD, phosphate, total BR, total protein, urea nitrogen–BUN, and uric acid.