The 30 and 40 refer to the size of the bulb in 1/8 inches — 30/8 and 40/8 inches respectively. Or more simply, the BR30 is just under 4″ across and the BR40 is 5″ across. So when you’re choosing a bulb for recessed cans, the first thing to know is the size of the cans.

What is difference between BR30 and BR40 light?

Within the floodlight category, the main difference between the BR30 LED and the BR40 LEDs that I tested is the amount of light produced. With 1100 lumens, the BR40 LEDs are about 40 to 70 percent brighter than the BR30 LEDs. In a two-story space they’ll “wash” the walls and ceiling as well as the floor.

How do I know what size flood light I need?

The number following the letters in a recessed light bulb indicates size: it’s the diameter of the light bulb in eighths of an inch. So, a BR30 is 30/8 inches, or three and 3/4 inches. An MR11 is 11/8 inches. So, you can swap out a PAR30 for an R30 or a BR30 – they are all the same size.

What does BR mean for light bulbs?

BR stands for “bulged reflector.” These bulbs traditionally had a bulged reflector inside the housing to increase the amount of light they put out, giving them a slightly bulging shape. This also creates a softer light to view a wide area without harsh edges or intense shadows.

Will a BR40 fit in a 6 inch can?

Where can I use a BR40? Typically BR40’s are used in 6-inch recessed can fixtures in the ceiling. 6-inches is the diameter of the opening of the recessed cans. 5-inch recessed cans will be difficult to fit since the diameter of a BR40 is already 5 inches.

Can BR30 bulbs be used outside?

BR30 light bulbs deliver soft-edged, directional light and can typically be found in general household light fixtures, recessed can lighting, and/or track lighting. … They are traditionally used outdoors as aircraft landing lights, security lighting, or indoors for concerts, movie production, and theater.

Can you use BR30 instead of BR40?

The 30 and 40 refer to the size of the bulb in 1/8 inches — 30/8 and 40/8 inches respectively. … For 4″ cans, you cannot choose BR40 bulbs — they’re too big. For 5″ cans, a BR30 will fit with a little space to all sides while a BR40 will fit with little to no space on the sides.

Can I use a BR30 bulb in an PAR30 fixture?

Notice that a PAR30 is the same diameter as a BR30 bulb. You can swap these bulb types to change from wide to spot, depending on what you need in each location.

Does BR30 fit E26?

The BR30 is for an E26 light socket, while the A19 is for an A19 socket. The E26 is a smaller / thinner socket and is a lot less common than the A19.

Can I use a BR30 bulb in a lamp?

The bulbs can be fitted into almost any household fixture, whether it be a ceiling fixture or a lamp. Meanwhile, BR30 bulbs offer directional lighting that points light straight ahead, making them better suited to recessed fixtures and can lights.

Article first time published on

How big is a BR30 bulb?

For example, a BR30 is 30/8ths of an inch or 30 divided by 8 which equals 3.75″ in diameter.

What size is BR40?

ShapeDiameter (inches)Diameter (inches)BR202-1/22BR303-6/82-1/2BR384-6/83-6/8BR4055

What is a BR30 flood light?

BR30 lamps are a type of lamp approximately 5 inches long and slightly less than 4 inches in diameter. They belong to category of directional lighting types, with typically a “wide flood” beam angle. … So, the “30” indicates a lamp diameter of 30/8 inches, or 3.75 inches.

Is BR40 same as R40?

The difference between R40 and BR40 bulbs isn’t size (they’re the exact same in that department) but beam spread. Both feature a built-in reflector, but with BR40 CFL bulbs, you can see a more bulged beam shape versus the more traditional shape of R40 CFL bulbs.

Can I use LED bulbs in recessed lighting?

A recessed fixture with a medium screw base lamp holder can take an incandescent, fluorescent, halogen, or LED light bulb. … If you want to be able to dim your recessed lights, or control them with a remote or automated system, choose fixtures you can use incandescent, halogen, or LED light bulbs in.

What wattage for can lights?

Most recessed lights use a BR30 65-watt light bulb. On average, these light bulbs produce about 600 Lumens. So when looking for a LED equivalent, look for one that has a light output of 600 or more.

What does BR30 mean?

What are R/BR30 Bulbs? Reflector (R) or Bulged Reflector (BR) 30 bulbs have a reflective coating on the inside of the bulb that directs light forward. Flood types (FL) and led floodlight bulbs spread light. Spot types (SP) concentrate the light.

How deep should the bulb be in a recessed light?

Most residential downlights top out at 7 ½” deep, meaning they will generally fit. Shallow recessed lighting is available if you don’t have much room. Most shallow recessed light fixtures are only 5” deep or less. There are deep housings available if you have extra room.

What is soft white vs warm white?

Soft white (2,700 to 3,000 Kelvin) is warm and yellow, the typical color range you get from incandescent bulbs. This light gives a warm and cozy feeling and is often best for living rooms, dens and bedrooms. Warm white (3,000 to 4,000 Kelvin) is more yellowish-white.

What is E26 bulb?

The term E26 refers to a light bulb’s cap or base – the bulb component that allows for both electrical and mechanical contact. The letter “E” in E26 refers to Edison Screw, the most standard of lamp bases, while the numerical “26” refers to its diameter in millimeters (approximately 1 inch).

What is a par30l?

What are PAR30 Bulbs? Parabolic aluminized reflector (PAR) 30 bulbs control light more precisely. … Like all light bulbs, the 30 value represents the diameter of the bulb in 1⁄8 of an inch. Therefore, PAR 30 types are short light bulbs that are 3.75 inches in diameter.

How do I know which light bulb to buy UK?

1. Determine what fitting or cap type you need. This is the most critical piece of information when selecting new bulbs – if you choose the wrong fitting or cap, your light bulb simply won’t fit. …
2. Decide if you want CFL, halogen, or LED. …
3. Consider brightness and colour. …
4. Find the best shape. …
5. Try Our Bulb Finder.

Are A19 and E26 the same?

All A19 lamps have an E26 base, but not the other way around The standards that govern the dimensions and design of A19 light bulbs also dictate that it must use an E26 screw base. In other words, all A19 light bulbs also have an E26 base.

What is the difference between Lifx A19 and BR30?

You’re simply choosing between two shapes of the same bulb. … Though LIFX’s A19 and BR30 bulbs feature flat ends, the A19 is narrower and fits more easily into small lighting fixtures.

Is BR40 same as PAR38?

PAR38 will fit – the number denotes eighths of inches wide, so PAR38= 38/8″ width, or 4 3/4″w. A BR40 is 40/8″ inch wide, or 5″ wide. About the same size and will fit in the same fixtures.

What size bulbs for can lights?

When choosing a bulb, you must find out the sizing of your recessed fixture can. For general household lighting, most recessed lighting cans are 4″, 5″, or 6″. If your household has 4” cans, only BR30 bulbs will fit. For 5″ cans, BR30 bulbs will fit with a little space, while a BR40 will fit with no space on the sides.

What wattage is BR30?

65 Watt – BR30 Incandescent Light Bulb.

Does BR30 fit E12?

Best answer: Philips Hue White and Color Ambiance come in a variety of different bulbs including E26, E12, PAR16, BR30, and GU10. Most of these bulbs can fit into a standard light socket, but the E12 and GU10’s need special sockets found in certain types of lightning fixtures.

Is BR30 Dimmable?

Philips BR30 LED flood light bulbs provide 650 lumens of soft white, dimmable light, equivalent to 65-watt incandescents with 80% less energy use. These bulbs fit standard medium base (E26) fixtures and are ideal for recessed can style lights.

How many lumens is a BR30 LED?

Product Description. These Xtricity LED BR30 light bulbs emit bright light using low energy consumption of only 9.5 watts. Offering 670 lumens of light output with a color temperature of 5000k cool white, these bulbs create a cozy and inviting atmosphere in any room.

Is R30 bulb the same as BR30?

The difference is simply the diameter of the bulb. R30 bulbs are the larger of the two bulbs. BR30 bulbs are actually the newer, more energy-efficient version of R20 bulbs and are the same size as R20s. R30 bulbs have a diameter of 3.75 inches, while BR30 bulbs have a diameter of 3.5 inches.