In modern usage of the term in Australia, sarking refers to a laminated aluminium foil layer, or reflective foil laminate (RFL), that is installed on the roof trusses, beneath the battens, supporting a tile or metal deck roof.

What is sarking made of?

In modern usage of the term in Australia, sarking refers to a laminated aluminium foil layer, or reflective foil laminate (RFL), that is installed on the roof trusses, beneath the battens, supporting a tile or metal deck roof.

What type of wood is sarking?

Sarking boards are softwood boards, generally about 150 mm wide, that are attached to the rafters of a pitched roof to give extra strength to the overall structure of a building.

What is foil sarking made from?

It consists of aluminum foil laminated onto paper or plastic backing with a flame retardant adhesive and fibreglass reinforcing mesh, and is manufactured in sheet form.

Is sarking the same as insulation?

Is Sarking the Same as Insulation? Sarking is classified as a type of insulation and will help increase the total R-Value of your home when installed properly. R-Value refers to how well the insulation resists the flow of heat. The higher the total R-Value, the better insulated your home is.

How is sarking installed?

Installing sarking is a two-stage process. First the sarking is installed and then battens are laid over the sarking. The battens are important because they provide a layer of air between the roofing and the sarking. Without this layer of air, the sarking would not provide effective insulation.

Is sarking breathable?

The sarking is the underlay of the roof, and a strong roof needs a strong sarking. Pay attention to that. Heat Protection: the sarking must be breathable. This means that must allow the vapor from the heating to get outside, but at the same time protect from cold/heat from outside.

What is a sarking membrane?

The term ‘sarking’ can also refer to a pliable membrane such as a layer of felt, polystyrene or reflective foil, that insulates or reflects heat and can provide extra weather resistance. It can act as a protective second skin for the roof by helping to prevent storm-driven rain penetrating into the roof cavity.

What is pitched roof sarking?

Thermoseal reflective foil roof sarking is a non-permeable, vapour barrier to reduce the transmission of moisture into the home and contribute R-Value to the roof system. Recommended for use in warmer climates. … Recommended for use in colder climates.

What material is under roof tiles?

Roofing felt, otherwise known as roofing underlay, sits underneath the tiles or slate on your roof and secures them in place. The felt is laid on the top of the supporting rafters and beneath the tiles or slate battens.

Article first time published on

Why is roof batten blue?

The reason our product is dyed blue is to distinguish it as meeting the necessary standard: it’s a colour commonly used by Nordic and Baltic suppliers. But it’s the BS5534 grading stamp, not the colour, that’s important.”

Is sarking required for colorbond roof?

When it comes to metal roofs, sarking is considered to be important as it prevents condensation that can cause rusting. … While COLORBOND® steel and ZINCALUME® steel roofing is already thermally efficient, the reflective quality of sarking will further improve thermal performance and keep your house cooler in summer.

How do I get rid of sarking?

Removing the scrim and wallpaper is simple. Pick it off the wall at a corner and pull. (note of caution: wear a good dust mask Rimu borer dust is going to fly everywhere) the scrim will rip off in sheets leaving the sarking behind full of tacks.

How do you retrofit a roof of sarking?

1. Step 1: Purchase High-quality Products. …
2. Step 2: Get an Accurate Roof Dimension. …
3. Step 3: Unfasten The Ridge Capping. …
4. Step 4: Remove The Clips. …
5. Step 5: Take off The Roof Battens. …
6. Step 6: Install The Sarking Sheets. …
7. Step 7: Reassemble The Roof Components.

Does roof need sarking?

Installing sarking protects your roof against bushfires and storms, provides a dust barrier, enhances roof cavity protection, and acts as a vapour barrier. “Even though sarking is not strictly compulsory, installation is highly recommended by us to prevent and avoid a large number of future problems for your home.”

Is roof sarking the same as Wall sarking?

Referred to as “wall wrap” for walls, the material is different from roof sarking in that it is manufactured with fine perforations to allow air to pass through allowing the material to “breath” and prevent condensation forming between the cladding and the wall wrap material.

Is sarking a Vapour barrier?

Thermoseal reflective foil roof sarking is a non-permeable, vapour barrier product designed to reduce the transmission of moisture into the home and contribute a reflective air gap R-Value to the roof system when positioned to adjacent to an inward or outward facing air cavity.

Why is sarking used?

Sarking is a pliable membrane that sits under your roof tiles, like a protective second skin. It helps insulation work more efficiently, and protects the things you value from storm driven rain and dust, condensation and bush fire ember attack.

What does sarking mean?

Definition of sarking 1 chiefly Scottish : thin boards for sheathing (as under shingles or slates) 2 Scottish : linen shirting.

Does sarking go under roof battens?

It is considered good building practice to install roof sarking parallel to the eaves (horizontal roll-out) and affix under the battens to allow water to cascade down the lap joints and provide a drying passage between the sarking and roof sheet.

How do I stop condensation on my colorbond roof?

To minimise the risk of water damage to ceilings or corrosion related to condensation under steel roof sheeting, a vapour barrier should be provided under the sheeting to prevent contact between the moist air in the building and the roof sheeting.

What is a roof blanket?

Knauf Insulation Roof blanket (unfaced) provides thermal and acoustic insulation for commercial roofs. Condensation control can be achieved when the product is faced with foil of the appropriate duty classification.

Do all houses have sarking?

Also, it is recommended that any tile roof with a pitch lower than 20 degrees should contain sarking. Today, though, many roofers offer sarking with all of their roofs, regardless of the size of it for extra moisture protection and other benefits.

Can you retrofit sarking?

You can be sure that they have the appropriate tools and techniques to retrofit sarking onto your existing roof. If in case you notice some damaged parts (e.g. tiles) on your tile or metal roof, call a professional to restore its appearance or consider tile replacement.

What year did sarking become compulsory?

This installation was the standard practise by builders and carpenters back in 1996, prior and onwards.

What is a breathable membrane?

Breathable membranes are water-resistant (as well as resistant to snow and dust), but air-permeable. … The membrane is located on the cold side of the insulation. It prevents moisture that may have been getting through the external cladding from piercing further into the structure.

What is the best breathable membrane?

Unventilated Roofs Klober Permo Air is the most breathable felt on the market and is the perfect choice for unventilated roof spaces or climates where condensation is likely to be a problem.

Do I need a breathable membrane?

When are they required? A breather membrane should be provided unless it can be established that: Any insulation in the cavity is resistant to wetting. … No water reaches the backing wall, either directly or by migration through the insulation.

Is bitumen Sarking felt breathable?

Bitumen 1F Felt is not breathable, and to prevent condensation requires a 50mm ventilated airgap beneath it, reducing the space available for insulation – or even preventing it from being used.

Why is felt put under roof tiles?

Roofing felt, installed under roof tiles or roof slates, protects the roof space from being exposed to wind and the ingress of rain and snow, should the roof tiles fail, leak, be damaged or be blown off.

Does a roof need a membrane?

Breathable roof membranes are crucial in pitched roofing projects, as they prevent the build-up of condensation, which can lead to damp, mould and rot. They allow moisture to move out of the roof space, whilst still preventing rainwater ingress, ensuring that the roof space stays dry.