SAEMetricInch17mm0.66911/16″0.68818mm0.70923/32″0.719

Is 11/16 The same as 15mm?

15mm = almost 19/32 inch. 16mm = 5/8 inch. 17mm = almost 11/16 inch. 18mm = just over 11/16 inch.

What is a 13/16 socket in MM?

Bolt DiameterMetricStandard7/16″16mm5/8″1/2″19mm3/4″9/16″21mm13/16″22mm7/8″

What size socket is 11 16?

SAE SizeMetric SizeInches Decimal11/16″0.68818mm0.70923/32″0.71919mm0.748

What is a 36mm in standard?

InchesMillimetersSpanner1.41736mm36mm1.4181 7/16 AF1.4807/8 Wworth; 1in BSF1.5001 1/2 AF

What is equivalent to a 16 mm socket?

Bolt DiameterStandardMetric5/16″1/2″13mm3/8″9/16″14mm7/16″5/8″16mm1/2″3/4″19mm

What MM is 11/16 socket?

SAEMetricInch17mm0.66911/16″0.68818mm0.70923/32″0.719

What is the next size wrench after 11 16?

Standard Combination Wrenches (1/4, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1)

What is a 11/16 socket used for?

More videos on YouTube 11/16-Inch hex standard 12-point socket designed for heavy work. Loosen or tighten bolts or nuts without rounding the heads. The snug fit ensures the bolt or nut keeps its shape.

What size wrench is in between 11/16 and 3 4?

A 3/4 inch socket is right at 19 mm and a 11/16 socket is right at 17.5 mm. An 18 mm socket would be right in the middle between the two and should work well for you.

Article first time published on

What is a 10mm socket used for?

For those of you who are non mechanically oriented, the 10 mm socket is probably the most used, most popular metric sized socket around for many medium sized nuts and bolts.

What is the same size as a 10mm socket?

So what is a 10mm socket equivalent? The equivalent imperial size of a 10mm socket is a 3/8 socket. Imperial sizes are known as SAE (Society of Automotive Engineers) or Standard.

What size is 10mm?

MMApproximate Size In InchesExact Size In Inches10mmLittle over 3/8 Inch0.39370 Inches11mm7/16 Inch0.43307 Inches12mmJust short of 1/2 Inch0.47244 Inches13mmLittle over 1/2 Inch0.51181 Inches

How many inches is 36mm diameter?

millimeterdecimal inchclosest fractional inch35mm1.38″1-3/8″36mm1.42″1-7/16“38mm1.50″1-1/2″40mm1.57″1-9/16″ (a golf ball is about 43mm, 1.68” in diameter)

What size is 11/16 spanner?

BOLT DIAMETER (INCHES)AF SPANNER SIZE (INCHES)SPANNER SIZE (MM)11/16 INCH17.46 MM1/2 INCH3/4 INCH19.05 MM9/16 INCH7/8 INCH22.22 MM5/8 INCH15/16 INCH23.81 MM

What is the decimal for 11 16?

Answer: 11/16 as a decimal is 0.6875.

How do I figure out my wrench size?

To calculate the wrench size needed, you must first measure your bolt. Take the diameter of the bolt, and multiply by 1.5. This calculation and conversion factor is valid for either metric or standard bolt sizes. The resulting number will be the size of the wrench you need to adjust the bolt properly.

What size is a 33mm socket in standard?

A 33mm metric socket is 1.29921 inches in size which most closely matches a 1 5/16 standard size socket.

Do they make a 20mm socket?

Your toolbox isn’t complete without the 3/8-in Drive 20mm 6 Point Metric Shallow Socket. This Socket comes with large size markings and a rust resistant coating.

What SAE and metric sizes are the same?

While there is no precise correlation between SAE fractional and metric measurements, there are many sockets that are close enough in size to be used interchangeably, in some circumstances. For example, 5/16 and 8 mm, 7/16 and 11 mm, 5/8 and 16 mm, 3/4 and 19 mm, 7/8 and 22 mm, and 15/16 and 24 mm.

What size bolt takes a 11/16 wrench?

US BoltsBolt Diameter (in)Head and Wrench Size (in)7/81 5/161 7/1611 1/21 5/81 1/81 11/161 -3/4

Is there a 33 mm socket?

Capri Tools Deep Impact Socket, 1/2-Inch Drive, 6-Point, Metric (33 mm)

What sizes are in a standard socket set?

There are four common socket sizes: 1/4 inch (0.6 centimeters), 3/8 inch (0.9 centimeters), 1/2 inch (1.3 centimeters) and 3/4 inch (1.9 centimeters).

What are the most common socket sizes?

Socket sizes are measured based on imperial system inches and fractions. Some of the commonly used SAE sizes are 3/8 in., 5/8 in., and 11/16 in. sockets. Metric sockets: Ideal for working on imported vehicles, metric sockets’ sizes are measured in millimeters.

Is there a 13 32 socket?

1-13/32 Inch Socket.

What is a 10mm spanner?

10mm Metric Chromed Ratchet Gear Spanner Fixed Head Combination Wrench. Tolsen 10mm metric combination wrench with head ratcheting gear spanner is suitable for professional or home mechanic. … It allows for easy access and turning of hard to reach bolts without displacing wrench from the bolt head or nut.

What socket is always missing?

It seems like the 10mm bolt size is the most common bolt size across most cars so, naturally, you’re going to use the 10mm socket the most. But, since the 10mm socket is so small, if you don’t remember where you place it, this is the socket you’ll most likely lose, hence all the memes.

Is there a 10.5 mm socket?

1/4″ Drive Twist Socket – 10.5mm.

What is a 10 mm socket in metric?

3/8″ Drive 6 Point Standard Metric Socket 10mm.

Is M10 same as 10mm?

If the size is M10 x 25, that would mean that the diameter is 10 mm. … The 25 indicated a length of 25 mm. A matching nut would be labeled M10, which also doesn’t require a thread pitch since it’s a course thread fastener.

Is there a 10mm socket?

In fact, the 10mm socket is one of the most commonly used metric size sockets of all. It’s no secret that the majority of parts under the hood and in the car require a 10mm. The applications may vary from car to car, but the 10mm is absolutely vital to complete a project.