Size of Tile420mm x 330mmMaximum Gauge345mmCover Width292mm (nominal)Covering Capacity9.9 tiles /m² at 75mm headlap 10.7 tiles /m² at 100mm headlapWeight of Tiling50kg/m² (0.49kN/m²) at 75mm headlap 54kg/m² (0.53kN/m²) at 100mm headlap

Are roof tiles a standard size?

Plain roof tiles will typically be 265mm x 165mm in size, with some minor variance depending on the manufacturer.

How thick is a Marley modern tile?

Answer: These tiles are 30mm thick.

What size is a concrete roof tile?

Concrete Roof Tiles The standard dimensions of the concrete roof tile are 420 x 330mm and 267 x 168mm, however, this may vary depending on the manufacturer.

How many Marley modern roof tiles are in a pack?

Marley Modern Interlocking Concrete Roof Tiles (Pack of 32 Tiles)

How do you measure roof tiles?

How to measure your roof. Take the roof width and multiply it by the slope height. This calculation will give you half the roof area, so then simply multiply by 2 to give you the area of both sides. You now have the area of your roof in square metres.

What size is an eaves tile?

Size: 200 x 165mm.

How many Marley tiles are in a pallet?

Tiles per pallet: 192.

How wide is a standard roof tile?

The standard dimensions of the roof tile is 342 mm in length, 252 mm in width and 69 mm in depth, however this may vary depending on the manufacturer.

What are the best roof tiles?

Clay and concrete are by far two of the longest lasting roof tile materials available to buy. With a potential life expectancy of over 100 years, many clay and concrete roof tiles even outlive the property they’ve been installed on. Slate tiles are another top-level choice in terms of longevity.

Article first time published on

Do you nail Marley modern tiles?

For all roof areas and rafter pitches, every tile should be mechanically fixed with at least a nail, a clip, or a combination of these options that provide adequate combined resistance to the wind uplift loads on the tiles. For roof pitches of 45° and above, each tile should be fixed with at least one nail.

Are Marley roof tiles any good?

They are the most sought-after tiles in the U.K, Marley has 100 years’ experience in the tiling industry and is known for their high-quality materials and manufacturing. Plain Marley roof tiles work particularly well for roof detailing, such as conical roofs, eyebrows and dormers.

What roof tiles go down to 15 degrees?

Interlocking Concrete and Clay Tiles: The benefits of interlocking tiles allow for faster installation and lower purchasing and labour costs. They can also be used on low pitched roofs, such as the Sandtoft 20/20 tile which is a highly popular clay option that can be installed on pitches of 15°.

How thick are concrete roof tiles?

MaterialConcreteMinimum roof pitch30-39 degreesMinimum pitch (deg.)35Dimensions (l x w)265x165mmThickness (mm)13

How much does a Marley Roof Tile weigh?

Tile Weights (Laid Weight – Kg/m²)MarleyRedland90EternitAnchor Roof TilesRivendale2040

What weight is a pallet of roof tiles?

A pallet of shingles can hold up to 42 bundles. The pallet weighs in between 2,100 and 3,350 pounds. A square of shingles is 100 square feet.

What are eaves tiles?

These eaves tiles make up the lowest row of tiles at the facia board to provide the double lap for the first row of full tiles. … Eaves tiles are also used for the top row of tiles at the ridge. The top edge of the second row down must be at a level where the ridge tile will cover it.

What size are plain tiles?

Plain TileTechnical DataSize268 x 165 mmMinimum Pitch35°Maximum Pitch90°subject to fixing specificationMinimum Headlap65 mm 35 mmbelow 90° at 90°

What's an eaves tile?

Definition of eaves tile : roofing tile used for the row along the eaves of a building. — called also starter.

How many roof tiles are in a square?

Roofing tiles vary in size, so there can be a huge difference in how many tiles will fill one square on your roof. Concrete tiles are usually around 90 tiles per square, while some clay tiles can range from 80 to 100. Other types of tile may run 160 tiles per square or more.

What is the size of Harvey tile?

The dimensions of the tiles are 65.9 inches long by 15.6 inches wide, and they cover a 63-inch long by 14.5-inch wide area. You can use this tile on any type of roof.

What are rosemary tiles?

The Rosemary name is synonymous with clay plain tiles, adding distinction and character to pitched roofs for over 175 years. … Produced from the finest clays, Rosemary is offered in a range of weathered, brindled and single colours that create striking and attractive roofs.

How much do you overlap roof tiles?

Your tiles should overlap one another by between 75mm and 100mm, depending upon their size as well as the pitch of your roof. This should mean that the gauge of your roofing battens will be around 32-35cm, measuring from the top of one batten to the top of the one below it.

Do roof tiles sit on fascia?

Eaves tiles At the eaves, where there is no tile below, interlocking tiles normally rest on a fascia board or tilting fillet to provide a support for the bottom edge.

What are the different types of roof tiles?

• Clay roof tiles.
• Concrete roof tiles.
• Natural slate roof tiles.
• Metal roof tiles.
• Lightweight roof tiles.
• Double style roman roof tiles.

Can you walk on Marley roof tiles?

Marley does not recommend foot traffic directly on the roof tiles or covering. Cracks or micro-cracks can occur on the roof covering if roofs are trafficked without appropriate access equipment.

What are modern roof tiles made of?

Clay is a traditional choice that offers durability and plenty of aesthetic variety. Concrete tiles are hard-wearing and suitable for even low-pitched roofs. Slate is the choice for homeowners that want nothing but the best. Metal is a practical option, ideal for industrial or commercial use.

How many roof tiles does a pallet have?

Hi Glosi, there are roughly 240 tiles in a pallet and I will need a roof plan in order to be able to estimate the quantities required for your house.

What are the 3 most common roofing tiles?

The most common materials used in metal roof tiles are copper, aluminum, zinc and steel. Of these materials, steel and aluminum are the most popular.

What is the most popular roof tile?

Concrete is by far the most common material used for this particular style, although they can be purchased in clay and slate. For roofs that require a low pitch, the Sandtoft Standard pattern interlocking tile is both easy to install and highly durable.

Where are Marley roof tiles made?

Our Keele site is based close to the M6 motorway in Cheshire. It has modern production lines that support the production of quality hand-made Marley roof tiles. We are always looking towards the future and ways to improve processes and outputs. We rely on our employees/teams to identify how this can be done.