6/4 X Thickness Frontier only6/4 x 101 ¼″ x 9 ¼″20′6/4 x 121 ¼″ x 11 ¼″20′

What width does azek come in?

Superior technology allows for unique design options including a wider width (7.25″) deck board and a narrow width deck board (3.5″) in addition to the standard width (5.5″) deck board.

Does azek come in sheets?

Use for bay windows, dormers and raised panels. AZEK Sheets leave the constant maintenance of wood behind with the same high-quality and lasting performance of AZEK Trim. … Enjoy the beauty and benefits of AZEK Sheets: Cover a wide area with a single piece.

Does azek come in 4x8?

AZEK Trim 3/8 in. x 4 ft. x 8 ft.

How much is a piece of AZEK?

ProductDeck RailsCost/sq. ft.Azek HarvestNo$17.50 – $24.00Azek ArborNo$20.00 – $26.00Azek VintageNo$22.75 – $27.50Azek HarvestYes$23.50 – $30.00

How thick is AZEK decking?

For instance, TimberTech AZEK MAX boards are the same thickness (1.5”) as traditional wood 2 x 6 boards, giving you a clean, flat surface between the old and new sections.

Does azek look like wood?

PVC azek trim looks just like wood (well, flawless wood) and lasts virtually forever. PVC azek trim impervious to rot and insect attack and doesn’t absorb water. It holds paint well because water can’t penetrate the material behind the paint.

Can you screw into azek?

AZEK Trim and Moulding products can be drilled using the same tools used to drill lumber. Drilling AZEK Trim and Moulding products is similar to drilling a hardwood. Care should be taken to avoid frictional heat build-up. Periodic removal of AZEK shavings from the drill hole may be necessary.

Does azek make shiplap?

AZEK Tongue and Groove profiles, available in shiplap and reversible WP4/nickel gap form factors, offer enhanced design and installation flexibility. Choose your own aesthetic; our profiles are equally suitable for horizontal and vertical orientation. Crisp, white semimatte finish complements all housing exteriors.

Can azek be painted?

Azek maintains that it does not require painting for a maintenance free product and we agree. … Make sure to wipe down the Azek with denatured alcohol to clean and properly prepare the surface before painting. • Your paint needs to be 100% acrylic.

Article first time published on

Is azek a PVC?

AZEK decks are made from polyvinyl chloride, or PVC, which is the same material used in vinyl siding. AZEK decking is known for its exceptional strength, durability, and low maintenance. Since it doesn’t contain any wood or wood by-products, AZEK boards don’t absorb moisture that can cause wooden boards to warp or rot.

How much is azek a square foot?

Azek Composite Decking CostsZip CodeSq. ft.BasicBetterAzek Composite Decking – Installation Cost$475.00 – $525.00$575.00 – $635.00Azek Composite Decking – Total$900.00 – $975.00$1150.00 – $1330.00Azek Composite Decking – Total Average Cost per square foot$9.38$12.40

Is azek or Trex more expensive?

Azek is quite a bit more expensive than Trex. In fact, Azek costs anywhere from $120 to $140 for a 16-foot board. This hike in price is due mainly to the fact that Azek has a reputation for being a more durable product than Trex.

What is the difference between Trex and AZEK?

The main difference between Azek and Trex decking is the material component for each. While Azek decking is entirely made from PVC, Trex is made from a composite of recycled wood chips and recycled plastic compressed together and considered as a capped composite decking.

How long will azek boards last?

AZEK TimberTech® decking products will not blister, peel, flake, crack, split, or rot for 20 years. However, careful maintenance is required to ensure the deck will last – or certain damage may occur. For example, staining, fading, scratching, and discoloration.

Can azek be stained?

AZEK Trim provides long-term value through trusted durability and beautiful flexibility. Unlike wood, AZEK Trim doesn’t need paint or stain for protection. Our trim comes in a beautiful semimatte white and has exceptional resistance to moisture, no matter the climate.

Is azek stronger than wood?

For example, 1/2-inch-thick Azek has a compressive strength of about 1,000 pounds per square inch, which is much less than the compressive strength of wood.

How wide is a 5 4 deck board?

Nominal SizeActual Size5/4 × 61″ × 5-1/2″6/4 × 61-5/16″ × 5-1/2″

How thick is a 1x6 deck board?

1x Lumber1x63/4 x 5-1/21×83/4 x 7-1/41×103/4 x 9-1/41×123/4 x 11-1/4

Can you use 1x6 for decking?

Never use 1×6 or 5/4×6 material in close to ground applications. Spacing between boards: You must allow space for your deck boards to expand when they take on moisture, as they will inevitably do when exposed to wet weather, rain or high humidity.

Can you use azek in shower?

The Azek material is a completely water proof PVC material, and only needs to be installed so that it doesn’t fall off. Since the shower cavity is already water tight, the Azek is laid on from the bottom of the shower up. An excellent water proof adhesive that sticks to PVC and the wall is used.

Can azek be used indoors?

Can AZEK Trim be used in interior applications? Yes. AZEK Trim products can be used on a variety of interior applications.

Does AZEK Decking get hot in sun?

*Although TimberTech AZEK decking products are cooler to the touch than many other deck board products, all decking products will get hot in the sun. Additionally, the darker the decking color, the hotter it will feel.

How much space should be between AZEK Deck boards?

Most composite and PVC decking brands, like Trex and Azek, recommend a maximum joist spacing of 16 inches OC.

Does AZEK decking shrink?

Azek Really Does Shrink – Fine Homebuilding.

Can azek touch the ground?

With its innovative polymer composition, AZEK Trim is highly moisture-resistant, making it ideal for ground-contact applications.

Is azek waterproof?

Azek is the most prominent brand name in the world of PVC trim at this time. … Besides being waterproof and incapable of rotting, Azek and other PVC trims will not allow damage from termites, carpenter bees or other woodboring insects, and it is naturally antimicrobal and mildew-resistant.

Can you nail into azek?

The fasteners should be long enough to penetrate the solid wood substrate a minimum of 1 ½”. Standard nail guns work well with AZEK Trim and Moulding products. If using pneumatic tools, the air pressure should be regulated so fasteners slightly penetrate the surface. … All fasteners must hit a solid framing member.

Who makes AZEK decking?

TimberTech offers a premium portfolio of capped polymer and capped composite decking – as well as railing, porch, lighting and paver products – while AZEK Exteriors manufactures distinctly unique trim and moulding.

Can I use PVC cement on azek?

Cellular PVC Cement Clear, contact-style adhesive bonds with PVC in a fast working time. … Use AZEK Adhesive to connect trim when a tight compression is required, such as connecting trim end-to-end (scarf joints) and at corners (miter joints).

Will epoxy stick to azek?

All 20 test sites—regardless of what epoxy was used—failed 100 percent of the Azek, creating large voids in the surface. The epoxy did not fail, and the average adhesive strength was identical.