Brad(noun) is conventionally the term assigned for thin nails with projected heads on all sides or on one side only. As a slang, brad is referent to a lover who is exceedingly sweet and caring and also fantastic in bed.

Who invented brads?

A brass fastener, brad, paper fastener or split pin is a stationery item used for securing multiple sheets of paper together. A patent of the fastener was issued in 1866 to George W McGill.

What is a brad gun?

A brad nailer is a powered nail gun that shoots 18-gauge brads (small nails). Brad nailers are used by woodworkers and especially finish carpenters to install casing and base trim up to 3/8 inches thick. … Most brad guns can shoot brads that range in length from 5/8 inches to 2 inches.

What is a brad head?

Brad nails, or brads, are made of 18-gauge steel wire. … The small diameter of brad nails makes them easy to mask in wood trim or paneling. In addition to being thinner than standard nails, they also feature a smaller head. The slender profile of brad nails helps to prevent splitting on delicate material.

Why are fasteners called brads?

This means that the meaning that it has is not only the meaning stated in this article but for the sake of this context, a brad is called a brad because it is a thin nail put in the hole of a paper. The brad is made of brass and is popularly known as a paper fastener.

Was Pepsi called Brad's drink?

On August 28, 1898, “Pepsi-Cola” got its name. Beginning in 1893, New Bern pharmacist Caleb Bradham developed and began serving a carbonated drink he called “Brad’s Drink.” He served the beverage from the soda fountain in his pharmacy at the corner of Pollock and Middle Streets.

What is another name for a Brad?

pegrivetpinspikescrewbolttackdowelfastenernail

Why was Pepsi called Brad's drink?

In 1898, small-town pharmacist Caleb D. Bradham looked for a name that would better describe his formula — which he was selling under the name “Brad’s Drink.” He bought the name “Pep Kola” from a local competitor and changed it to Pepsi-Cola.

Why did Brad's drink change to Pepsi?

As customer demand increased, Bradham devoted his energies to selling his beverage. He changed its name to Pepsi-Cola (probably because the drink aided digestion much like pepsin enzyme) and incorporated the company in 1902.

Can you hammer a brad nail?

Luckily, you can definitely use a hammer with brad nails! But there’s also a reason many people prefer brad nailers. Hand nailing brad nails comes with a lot of challenges and is rarely the right solution. It’s easy to scuff or damage the wood swinging a hammer, and it can be tough to use a hammer on brad nails.

Article first time published on

What are Type 47 nails?

Wire nails of type 47 (length: 10 – 32 mm) It renders the inserted steel nails virtually invisible in the material which helps with an unobtrusive installation of skirting boards and ceiling mouldings. Boards or textiles can also be affixed with the fine nails leaving hardly any trace.

Are Brad nails strong?

By design, brad nails are naturally weaker than traditional nails. So, they won’t hold as well on mid to large-sized projects. Also known as brads, these nails are intentionally made to be thinner than conventional nails; this helps to prevent splitting any of the wood you’re working with.

What is a first fix nail gun?

A first fix nailer is generally used to complete rough woodwork, such as wood framing, roofing & flooring. The term “first fix” is applied, as these nailers are intended for use in areas that aren’t going to be exposed upon completion of the project, as larger nails that leave impressions on the wood are used.

Will Brad nails hold plywood?

For thicker plywood, you would not want to use a brad nailer. It is recommended to use a framing nailer. For thinner plywood, 1/4 inch in thickness, or the more common 1/2 inch plywood, brad nails have an advantage since they will not risk splitting the wood. Use a 1 1/4-inch nail.

What are 16-gauge brad nails used for?

16-Gauge Finish Nailers Because it is thicker, it holds better than 18-gauge brads. Also, it can be used to fasten thicker, denser pieces of wood. Some common uses for 16-gauge nails include construction or installation of: Crown and base moldings.

What can I use in place of a Brad?

You can use a pin, craft knife, or any other pointy tool that you have handy; place paper on the underside of an old mouse pad, and make a hole right where you want to place your brad. Insert on this same surface to avoid scratching surfaces.

Where Do Brad Nails get their name?

It’s pretty random that the paper fragment created when you three-hole punch paper is called a “Chad” and the brass fastener you put through that hole is called a “Brad”.

What are split pins made of?

Split pins need to be strong enough to hold components in place, but flexible enough to be bent to secure the fastening. Split pins are typically made from aluminium, brass or stainless steel.

Why was cheerwine invented?

Peeler created Cheerwine in 1917 in Salisbury, North Carolina amid a sugar shortage. His drive to start his own soft drink led him to a salesman from St. Louis who sold him a wild cherry flavor that blended well with other flavors. … The taste sensation known as Cheerwine was born.

Who invented Sprite?

Sprite is a colorless, lemon and lime-flavored soft drink created by The Coca-Cola Company. It was first developed in West Germany in 1959 as Fanta Klare Zitrone (“Clear Lemon Fanta”) and was introduced in the United States under the current brand name Sprite in 1961 as a competitor to 7 Up.

Which came first Coke or Pepsi?

A Brief History of Coke and Pepsi Coca-Cola was invented in 1986 by a pharmacist in Columbus, Georgia, who began selling it to soda fountains, the History Channel reported. Six years later, the Coca-Cola Company was founded. Pepsi was also invented by a pharmacist, who invented his own sugar drink in 1893.

How did Dr Pepper get its name?

It was served at the drugstore where Alderton worked, and the first Dr Pepper fans asked for a “Waco.” The oldest soft drink in the United States, it was later named Dr Pepper, according to legend, after Dr. Charles Pepper, a friend of the drugstore owner.

What was the first soft drink to be consumed in outer space?

NASA said, yes, “Coke Was It” in space–for at least eight hours, or until astronauts popped a Pepsi too. Space agency officials confirmed what Coke was bragging about with full-page ads in papers around the country that proclaimed: “The first soft drink enjoyed in space was a Coke.

Which country is the owner of Pepsi?

TypeColaManufacturerPepsiCoCountry of originUnited StatesIntroduced1893 (as Brad’s Drink) 1898 (as Pepsi-Cola) 1961 (as Pepsi)ColorCaramel E-150d

What does Coca Cola mean?

Coca-Cola, or Coke, is a carbonated soft drink manufactured by The Coca-Cola Company. … The drink’s name refers to two of its original ingredients: coca leaves, and kola nuts (a source of caffeine).

What does Pepsi stand for Israel?

PEPSI full meaning is Pay Every Penny to Save Israel.

What are Brad Nailers for?

A brad nailer is a light-duty tool. It might be used for adding narrow decorative moldings to plain panels or under stair treads. These tools are popular with crafters and model makers. They are often used for making birdhouses and bat boxes.

What are Type 53 staples?

53 Series staples are wire staples slightly thicker than the 13 series. Normally used in hand and some semi pro electric guns. 53 series staples are available in 6, 8, 10, 12 and 14 mm depths. Also available in a pack containing one of each size.

What gauge are Type 47 Brad Nails?

After several emails through their supplier, I eventually found out that 18 gauge brad nails are the same as “Typ 47” and if you are careful where you buy them, they are not expensive.

Can I use finish nails in a brad nailer?

Brad nails are formed from a fine, 18-gauge wire, which means they are smaller in diameter and typically have less holding strength. The benefit to an 18-gauge brad is its size. … Finish nailers will run 15- or 16-gauge finish nails, in both angled and straight varieties depending on the tool.

How long should brad nails be trimmed?

The rule is simple: a brad should be three times as long as the thickness of the material you are fixing. Example: if the material is 15 mm thick, the brad should be 45 mm long.