A fence should be stained every two to three years to preserve the look and function of the fence.

What time of year is best to stain a fence?

The best time to stain a deck is when it’s been dry for several days and the wood is dry. You need at least 48 hours with no rain in the forecast after the application of the stain. Temperatures should be between 50 and 90 degrees Fahrenheit. For most people, these conditions are met between late spring and early fall.

What temperature should it be to stain a fence?

Apply stain only at the proper temperature. For most stains, 70 degrees Fahrenheit is the optimum, with the safety range from 50 to 90 degrees Fahrenheit. Stains do vary, so check the label first. Avoid high humidity and staining on hot surfaces.

How do you know when to stain your fence?

To test your new wood fence for appropriate dryness, simply place a bit of water on the surface boards. If the water beads up, you’ll need to wait and check it again later. If the water seeps into the wood, the wood is suitably dry and ready to be stained or sealed.

How long does fence need to dry before staining?

Checking the Forecast Before Staining Staining your fence during the right weather conditions is key. Before you apply any stain or sealer, your fence needs to be free from moisture for at least 24-48 hours after cleaning it.

What if it rains after I stain my fence?

If it rains within 48 hours after you apply the stain, the water will soak into the wood pores and try to displace the stain. This will result in a splotchy surface rather than an even tone. If it rains right after you apply the stain, the stain will peel and flake off.

Is it better to spray or roll stain on a fence?

I recommend using an airless sprayer when applying wood fence stain. Using only a brush and roller for this project is extremely time-consuming and labor-intensive. … Use a sprayer to quickly apply the material on the surface and a brush and roller to push the material into the wood.

How many coats of stain do I need for a fence?

In most cases, solid-color stains are like traditional paint and need just one coat to protect your fence. Semi-transparent penetrating stains often need two coats, with the second coat applied approximately an hour after the first coat.

Is it OK to stain only one side of a fence?

A question that customers sometimes ask is whether both sides of the fence should be sealed. … In reality, if one side of the fence faces a neighbor and they choose not to stain or seal their side will discolor and yours won’t, without this affecting the structural integrity of the structure.

Can you stain wood in 40 degree weather?

Wood stain works in a wide range of temperatures. Staining at temperatures ranging from 50 to 90 degrees Fahrenheit usually works, but the optimal temperature is around the mid-70s, not too hot and not too cold. … Give the wood time to warm up if it’s colder than the room air.

Article first time published on

Can I stain in 40 degree weather?

“Staining wood usually works between 50 and 90 degrees Fahrenheit,” says Phillip Ash, the founder of Pro Paint Corner, “but the best temperature would be at around 70 degrees Fahrenheit.” Some brands or types of stains may work outside that range, but it’s the generally accepted best temperature for staining wood.

Can you stain a fence in 40 degree weather?

If you’re staining your deck in the spring or fall, wait for a day with highs above 50 degrees Fahrenheit. … If it drops below 32 degrees Fahrenheit before the stain has thoroughly dried, it can hinder the curing process. Penetrating stains may fail to penetrate, and the stain’s adhesion could be compromised.

Do you have to pressure wash a fence before staining?

Before applying any type of finish to a fence, including stains, you need to remove any old finish(es) and remove any built up dirt, dust, grime or other substances from the fence. … Pressure washing a fence before staining it will also ensure blemishes are removed that could show through the surface of the stain.

Can you stain a wet fence?

no. Most wood stains are oil-based and therefore will not bond well to a wet surface. If applied to wet woods, the stain will be thin and will eventually wash off after a few sizable rains. … It is simply better to stain wood when dry.

Is it necessary to powerwash a fence before staining?

Should You Power Wash Before Fence Staining? More often than not, it is not a good idea to power wash a fence before staining it. Power washers can force the mold and mildew (the greying color of the fence) deeper into the wood pickets. This causes the wood to deteriorate quicker.

Can you stain an old fence?

Whether your wooden fence is years old or newly installed, it can benefit from a single inexpensive addition: stain. Applying wood stain to the slats improves its design and prolongs the lifespan of your hard-working outdoor structure—a win-win!

What is the easiest way to stain a fence?

Drape drop cloths over nearby surfaces and objects to protect them from stain spatters. Apply stain to broad surfaces using a ½-inch nap roller. You can also apply stain with an electric cup sprayer. Move the sprayer vertically to apply stain with the wood grain on the fence.

How soon can you put a second coat of stain on wood?

For a deeper color and sheen, wait one hour and apply a second coat. After 1 hour, the surface is dry to the touch. Wait overnight before subjecting the wood to normal use. Optional, for additional luster or sheen a clear protective finish can be applied.

How long does wood need to dry before staining?

Allow the wood to dry 24 hours before applying stain.

Can you stain a deck in the evening?

If you stain your deck in the summer, make sure you do it out of the direct sunlight. Applying a deck stain in direct sun will cause the stain to dry to quickly and can result in premature stain failure. In the summer, stain your deck in the morning or evening so the deck surface isn’t too hot.

Can you paint your side of your Neighbours fence?

Your neighbour doesn’t have to change a wall or fence just because you want them to, for example making it higher for privacy. You can’t make changes to your side without their permission, such as painting it. If the wall or fence seems dangerous, point this out because your neighbour might not be aware.

Can I stain a shared fence?

Paint or stain your side of the fence to protect the wood and prevent weathering. Coordinate with your neighbor to paint the fence at the same time, if you wish, or simply to make sure you use the same products.

How many gallons of stain do I need for a fence?

For a small fence, up to 175 square feet, you will only need one gallon of stain, in any transparency. If your fence is larger, up to 550 square feet, you will need to buy 2 gallons of stain. For very large fences, up to 700 square feet, you will need 3 to 4 gallons of stain to complete the project.

Can you stain a fence GREY?

Staining a gray fence can restore some of the natural color and help to protect the fence from further weather-related damage. Restore color to a gray fence with wood stain. … Scrub the surface of the fence with soap and water or wash the wood with a power washer.

Should I stain my fence before or after assembly?

Most installers will tell you to wait a period of time after installation to apply stain or paint. This is true, especially if you install with pressure treated pine fence posts. Just like a deck, it needs to dry before applying a finish.

Can I apply a second coat of stain a week later?

Yes you cannot apply now but you can apply a light coat after a light cleaning 6-12 months later. It is normal that you have to redo every 2 years and other semi-transparent brands will not last any longer. They all fade.

Can you stain wood twice?

Keep good records so you can duplicate what you have done if you need to. Leave the stain on the wood longer before wiping it off. … Apply a second coat of stain after the first has dried fully. This will usually produce a darker coloring, but it adds a step to the process and slows production.

What happens if you stain when it's too cold?

If it’s too wet or cold, the drying time for stains can easily double. In extreme cases, the product will just stay wet until the humidity decreases or the temperatures rises. Oppositely, if it’s too warm, the stain will dry very quickly and could lead to lap marks or uneven penetration.

What temperatures can you stain wood?

Most stains can be applied from about 50° F to 90° F — but many people don’t realize this range refers to the temperature of the wood surface, not the air. A day that’s 70°F and sunny can push deck surface temperatures above 90°F leading to application challenges and shortened open times.

What temperature can you stain wood Celsius?

DO wait until temperatures are between 50° and 90° degree Fahrenheit, 10° – 35° degrees Celsius to stain. Cold temperatures slow drying times. In fact, you may end up with a sticky finish that never cures. The only way you can correct the problem if this happens is to remove the stain and start over.

Why is the stain not drying?

If you applied the stain correctly, and it still remained tacky, it could be due to rainy weather or high humidity. … In either case if the tackiness doesn’t go away, wipe the wood down with mineral spirits or naphtha to remove most of the stain, let it dry thoroughly, then try again using a fresh can of stain.