performs the same function in the same place on the wall as crown molding. The main difference is the profile; cove molding has a concave profile, which bows inward, while crown molding has a convex, flatter appearance that projects out from the wall.

What is coved crown molding?

Also known as coving, cove molding is plain, concave-shaped trim employed where walls and ceilings meet. It can also be used on stairs, at the meeting of risers and treads. In essence, cove may be considered a less ornate version of crown.

What do you use cove molding for?

Cove moulding, also known as coving, is a type of trim that serves a similar function to crown moulding. They’re both used to smooth out the transition between the wall and ceiling or to decoratively cap your walls, cabinets, mantles, or shelves.

Is cove molding out of style?

To answer your burning question: No – crown molding will never go out of style.

Do modern homes use crown molding?

Modern Interiors do not use crown, Traditional has additional layers of decorative molding, Transitional is somewhere in the middle.

What is the top of cove molding?

The simpler part is always the top. The more detailed side is always closer to you (on the bottom). Crown moulding is installed in the reverse fashion of base moulding. The deeper grooves go on the bottom, and shallower grooves belong on the top.

Can you use cove molding for a ceiling?

When to Use Cove Molding This can be bought for narrow widths. It can be used on top and bottom corners and not strictly ceilings.

When should you not use crown molding?

There are a couple of situations when you don’t want to use crown molding. If you have cathedral or vaulted ceilings, a typical crown molding will probably not fit or look good. Also, crown moldings need a distinct starting and stopping point, ideally going around a room in both directions and meeting again.

Is Crown Moulding outdated?

Crown molding has been around for centuries and it will continue to be a touch of elegance for centuries to come. It is not going out of style. However some people have a preference for it while others will never notice it until it’s not there.

What are the different types of crown molding?

• Solid Wood. Solid wood crown molding can be used for any installations. …
• MDF. Medium-Density Fiberboard (MDF) crown molding can be used in rooms where trim is painted. …
• Polyurethane. Polyurethane crown molding works in most installations. …
• PVC. …
• Polystyrene.

Article first time published on

Where should you not put crown molding?

It’s untrue that crown molding should not be installed in rooms with low ceilings. In fact, using moldings that project further than the wall can provide an optical illusion that makes ceilings appear taller than they actually are.

What can I use instead of crown molding?

What Can I Use Instead of a Crown Molding? Medium density fiberboard molding, stick and peel strips, and polyurethane options are the best alternatives to crown molding. They are inexpensive and easy to install. You can also ‘diy’ the installation.

Can you put crown molding on 8 foot ceilings?

For an 8 foot ceiling height the recommended crown size is 2-1/2″ to 6″ tall with no picture mold. Use the square footage and level of formality of the room to choose an appropriate crown size and style in that range.

Does crown molding add value?

Crown Molding can lead to increased home value and a positive ROI depending on how much you have invested in the project. Many homeowners want easy projects that will increase their resale price, and you can do that by adding crown molding. … You can put crown molding in any room.

What is top and bottom of crown molding?

Crown molding can look good both ways: in its usual alignment or upside-down, which makes it difficult to determine the end that’s supposed to be the top. Generally, the end with the least amount of detail goes on top, and the decorative trim faces the bottom.

How far down the wall does crown molding go?

For standard 8-foot-high ceilings, the crown/cornice height should be 2½ to 6 inches; for 9-foot ceilings, 3 to 7½ inches, and for 10-foot ceilings, 3½ to 8 inches.

Should crown molding be the same color as baseboards?

While it is acceptable for your baseboards and crown molding to be the same color, you do not need to feel obligated to design your room this way. … If you are feeling up to it, get creative with your design. Paint the crown molding one color while the trim and the baseboards are another color.

Should you paint before installing crown molding?

Painting Molding While you have options about how to approach painting your walls, you should always paint or otherwise finish the molding itself prior to installation. Prime the molding before painting, and for both paint and other finishes, apply the finish to all sides, even the back. This prevents warping.

Is it OK to put crown molding in a bathroom?

Bathrooms can really benefit from crown molding as it adds a beautiful elegant look to the décor. … There are many different types of crown molding but the best type of crown molding to install in your bathroom is moisture-resistant crown molding.

Do you nail crown molding into ceiling?

Crown molding is usually nailed to the wall studs along the bottom edge and into the ceiling joists above–a lot of stud-finder work. I skip all that by installing a plywood backer board to the top plate (the horizontal framing member above the wall studs).

How do you fill the gap between crown molding and ceiling?

After you have nailed the crown molding to the ceiling, you may notice a gap between the ceiling and the crown molding. You can minimize the appearance of the gap by simply squeezing in some silicone caulk between the molding and the ceiling.

How do you use nail cove trim?

Place the trim and drive a 2-inch finish nail into the lower edge of the cove face at a 90-degree angle. Stop hammering when the head is 1/2 inch from the surface of the wood and finish driving the head below the surface with a nail set to avoid accidentally striking the trim with the hammer.

Should crown molding be the same color as the ceiling?

The crown molding color generally should not be the same as the ceiling shade because when molding matches the ceiling, the ceiling seems heavier and the molding insignificant. The molding was put there as a decorative accent for the room; camouflaging it against the ceiling has the opposite effect.

Why does crown molding look so good?

“When it’s done right, crown molding helps lift the space, drawing your eye up to make the ceiling feel higher,” says Dixon. “It’s a lovely bit of detail that can bring out the faded grandeur in an old house while also hiding all sorts of sins—even distracting the eye from cobwebs or peeling paint.”

Does crown molding look good in small rooms?

Crown molding does not make a room look smaller — in most instances. … If the room is small and has normal or low ceilings, a 2- to 4-inch-width molding is appropriate. The molding can be wider if the ceiling is a little higher and can be up to 6 inches wide for a very high ceiling — up to 12 feet.

Does crown molding make ceiling look higher or lower?

Crown molding can certainly be used to make ceilings look even higher. If you paint over the trim in the same color as the walls, the ceiling will seem to blend into the wall, and you won’t notice the height as much. Thin trim can also make the ceiling line appear further away.

What is the trim in the middle of the wall called?

Chair rail by definition is molding on an interior wall that is attached horizontally around the perimeter of a room. Most people associate chair rail as a type of trim that prevents chairs from rubbing against the walls.

What do you call the trim around the floor?

Baseboard is the trim that defines where the floor ends and the wall begins. … Baseboard is usually thinner than door trim, which is called casing, and at least one-third wider.

Does crown molding have to touch the ceiling?

Crown molding does not always have to be installed against both the wall and the ceiling. For a fun effect, consider installing the crown only against the wall and moving it downward about a few inches.

How many feet of crown Moulding do I need?

Divide the total number of inches by 12 to convert from inches to linear feet. For example, if your wall measured 40 inches in length, and you are installing molding on the top and bottom, 40 x 2 = 80 inches. Divide 80 by 12 to get 6.66 linear feet.